> + l) RapidIO "FSL PowerPC bridge RapidIO" or something like that -- you aren't doing a _generic_ rapidio binding here.
> + RapidIO is a definition of a system interconnect. This node add > + the support for RapidIO processor in kernel. The node name is > + suggested to be 'rapidio'. > + > + Required properties: > + > + - compatible : Using "fsl,rapidio-delta" for Freescale PowerPC > + RapidIO controller. > + - #address-cells : Address representation for "rapidio" devices. > + This field represents the number of cells needed to represent > + the RapidIO address of the registers. > + See 1) above for more details on defining #address-cells. > + - reg : Offset and length of the register set for the device > + - ranges : Should be defined as specified in 1) to describe the > + translation of addresses for memory mapped RapidIO memory > + space. > + - interrupts : binding interrupts for this device node, > + please follow below orders: > + <err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq > + msg2_tx_irq msg2_rx_irq ... msgN_tx_irq msgN_rx_irq>. _All_ of these are "as specified in 1)". You should be saying the specifics for your device here; for example, what register blocks of your controller are described in "reg", and in what order? Segher _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
