Setup dr_mode for USB-DR to peripheral as the default (host mode) doesn't make
much sense for the mini-AB connector on the ITX board.
Peripheral mode is preferable to OTG as the fsl_usb2_udc.c driver doesn't yet
properly support it.
Signed-off-by: Peter Korsgaard <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/mpc8349emitx.dts | 1 +
1 file changed, 1 insertion(+)
Index: linux-2.6.23-rc8/arch/powerpc/boot/dts/mpc8349emitx.dts
===================================================================
--- linux-2.6.23-rc8.orig/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ linux-2.6.23-rc8/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -99,6 +99,7 @@
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <26 8>;
+ dr_mode = "peripheral";
phy_type = "ulpi";
};
--
Bye, Peter Korsgaard
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
