On Fri, Oct 05, 2007 at 05:09:28PM -0500, Kumar Gala wrote:
>
> On Oct 5, 2007, at 12:40 PM, Anton Vorontsov wrote:
>
>> Hello Kumar,
>>
>> This is respin of MPC8568E-MDS patches, on top of master branch
>> as of today.
>>
>> If there are no objections against SPI patch, please Ack it, thus
>> David could pick it up.
>
> I've applied patches 1-5 however I'm not able to get UCC enet working on my 
> board.

I wonder how you managed to boot it w/o sixth (PCI) patch in this patch set,
for me board hanged w/o it.

> Is there something special that has to be done?  (I've got the card 
> standalone, no MDS backplane).

Nothing special, from what I can remember. Though, double checking switches
on the board might help.

Also, .config and bootlog would help.

> I'm using the 1.3.0-rc2 u-boot w/o any modifications.

1.2.0-g60174746 here.

> Also, I tried a PCIe e1000 card w/the .dts that's in my tree and that works 
> w/o any issue.

Strange enough. I'd say it's impossible with your current tree. Maybe you've
used some stale dtb? Because dts is seriously broken as now, and I can't
believe that it worked for you. ;-)

Thanks,

-- 
Anton Vorontsov
email: [EMAIL PROTECTED]
backup email: [EMAIL PROTECTED]
irc://irc.freenode.net/bd2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to