Signed-off-by: Li Yang <[EMAIL PROTECTED]>
---
Documentation/powerpc/booting-without-of.txt | 32 ++++++++++++++++++++++++++
1 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt
b/Documentation/powerpc/booting-without-of.txt
index 76733a3..f499f76 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1824,6 +1824,38 @@ platforms are moved over to use the
flattened-device-tree model.
fsl,has-rstcr;
};
+ l) SATA nodes
+
+ SATA nodes are defined to describe on-chip Serial ATA controllers.
+
+ Required properties:
+
+ - compatible : Should specify what this SATA controller is compatible
+ with.
+ - reg : Offset and length of the register set for the device.
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+
+ Recommended properties :
+
+ - phy-handle : Some SATA controller uses a shared SerDes PHY. This
+ property should specify the phandle of the SerDes node.
+
+ Example:
+
+ [EMAIL PROTECTED] {
+ compatible = "fsl,mpc8315-sata";
+ reg = <19000 1000>;
+ interrupts = <2d 8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &serdes1 >;
+ };
+
More devices will be defined as this spec matures.
VII - Specifying interrupt information for devices
--
1.5.3.2.104.g41ef
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
