On Wed, Dec 12, 2007 at 04:54:29PM -0600, Scott Wood wrote:
> This board is also resold by Freescale under the names
> "QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE".
[snip]
> + localbus {
Should be [EMAIL PROTECTED]
> + compatible = "fsl,ep8248e-localbus",
> + "fsl,mpc8248-localbus",
> + "fsl,pq2-localbus";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + reg = <f0010100 40>;
> +
> + ranges = <0 0 fc000000 04000000
> + 1 0 fa000000 00008000>;
> +
> + [EMAIL PROTECTED],3800000 {
> + compatible = "cfi-flash";
> + reg = <0 3800000 800000>;
> + bank-width = <4>;
> + device-width = <2>;
> + };
> +
> + [EMAIL PROTECTED],0 {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + reg = <1 0 10>;
> + compatible = "fsl,ep8248e-bcsr";
> + ranges;
> +
> + mdio {
As I think I said about another tree, this mdio-under-bcsr arrangement
is pretty strange. What's going on here.
> + device_type = "mdio";
> + compatible = "fsl,ep8248e-mdio-bitbang";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1 8 1>;
> +
> + PHY0: [EMAIL PROTECTED] {
> + interrupt-parent = <&PIC>;
> + reg = <0>;
> + device_type = "ethernet-phy";
> + };
> +
> + PHY1: [EMAIL PROTECTED] {
> + interrupt-parent = <&PIC>;
> + reg = <1>;
> + device_type = "ethernet-phy";
> + };
> + };
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0 0>;
> + };
> +
> + [EMAIL PROTECTED] {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + device_type = "soc";
Ditch the device_type.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev