On Wed, Feb 10, 2016 at 05:02:48PM +1100, Gavin Shan wrote:
In this series, there're some issues on attempt to recover errors on
pass-throu VFs. Updated series (v15) with more patches sent to address
the issues:
So please ignore this series and look at v15.
Thanks,
Gavin
>This applies to linux-powerpc-next and additional unmerged patches:
>
>[v2,1/4] powerpc/eeh: Fix stale cached primary bus
>powerpc/eeh: fix incorrect function name in comment
>[V2] powerpc/powernv: Remove support for p5ioc2
>[V7,1/6] powerpc/powernv: don't enable SRIOV when VF BAR has non
>64bit-prefetchable BAR
>92e963f Linux 4.5-rc1 - Linux powerpc next branch
>
>This patchset enables EEH on SRIOV VFs. The general idea is to create proper
>VF edev and VF PE and handle them properly.
>
>Different from the Bus PE, VF PE just contain one VF. This introduces the
>difference of EEH error handling on a VF PE. Generally, it has several
>differences.
>
>First, the VF's removal and re-enumerate rely on its PF. VF has a tight
>relationship between its PF. This is not proper to enumerate a VF by usual
>scan procedure. That's why virtfn_add/virtfn_remove are exported in this patch
>set.
>
>Second, the reset/restore of a VF is done in kernel space. FW is not aware of
>the VF, this means the usual reset function done in FW will not work. One of
>the patch will imitate the reset/restore function in kernel space.
>
>Third, the VF may be removed during the PF's error_detected function. In this
>case, the original error_detected->slot_reset->resume sequence is not proper
>to those removed VFs, since they are re-created by PF in a fresh state. A flag
>in eeh_dev is introduce to mark the eeh_dev is in error state. By doing so, we
>track whether this device needs to be reset or not.
>
>This has been tested both on host and in guest on Power8 with latest kernel
>version.
>
>Changelog
>=========
>v14:
> * Rebased to linux-powerpc-next branch, plus additional patches related to
> powerpc/pci and powerpc/eeh subsystems.
> * Minor code changes
> * Fix build error on pSeries reported by mpe
>v13:
> * move eeh_rmv_data{} to eeh_driver.c
>v12:
> * Rephrase some commit log to make it more clear and specific
> * move vf_index assignment in CONFIG_PPC_POWERNV
> * merge "Cache VF index in pci_dn" with "Support error recovery for VF PE"
> * check the return value after eeh_dev_init() for VF
> * initialize the parameter before pass to read_config()
> * make pnv_pci_fixup_vf_mps() a dedicated patch, which fixup and store mps
> value in pci_dn
>v11:
> * move vf_index assignment in marco CONFIG_PPC_POWERNV
> * merge Patch "Cache VF index in pci_dn" into Patch "Support error recovery
> for VF PE"
>v10:
> * rebased on v4.2
> * delete the last patch "powerpc/powernv: compound PE for VFs" since after
> redesign of SRIOV, there is no compound PE for VFs now.
> * add two patches which fix problems found during tests
> powerpc/eeh: Support error recovery for VF PE
> powerpc/eeh: Handle hot removed VF when PF is EEH aware
>v9:
> * split pcibios_bus_add_device() into a separate patch
> * Bjorn acked the PCI part and agreed this patch set to be merged from ppc
> tree
> * rebased on mpe/linux.git next branch
>v8:
> * fix on checking the return value of pnv_eeh_do_flr()
> * introduced a weak function pcibios_bus_add_device() to create PE for VFs
>v7:
> * fix compile error when PCI_IOV is not set
>v6:
> * code / commit log refactor by Gavin
>v5:
> * remove the compound field, iterate on Master VF PE instead
> * some code refine on PCI config restore and reset on VF
> the wait time for assert and deassert
> PCI device address format
> check on edev->pcie_cap and edev->aer_cap before access them
>v4:
> * refine the change logs, comment and code style
> * change pnv_pci_fixup_vf_eeh() to pnv_eeh_vf_final_fixup() and remove the
> CONFIG_PCI_IOV macro
> * reorder patch 5/6 to make the logic more reasonable
> * remove remove_dev_pci_data()
> * remove the EEH_DEV_VF flag, use edev->physfn to identify a VF EEH DEV and
> remove related CONFIG_PCI_IOV macro
> * add the option for VF reset
> * fix the pnv_eeh_cfg_blocked() logic
> * replace pnv_pci_cfg_{read,write} with eeh_ops->{read,write}_config in
> pnv_eeh_vf_restore_config()
> * rename pnv_eeh_vf_restore_config() to pnv_eeh_restore_vf_config()
> * rename pnv_pci_fixup_vf_caps() to pnv_pci_vf_header_fixup() and move it
> to arch/powerpc/platforms/powernv/pci.c
> * add a field compound in pnv_ioda_pe to link compound PEs
> * handle compound PE for VF PEs
>v3:
> * add back vf_index in pci_dn to track the VF's index
> * rename ppdev in eeh_dev to physfn for consistency
> * move edev->physfn assignment before dev->dev.archdata.edev is set
> * move pnv_pci_fixup_vf_eeh() and pnv_pci_fixup_vf_caps() to eeh-powernv.c
> * more clear and detail in commit log and comment in code
> * merge eeh_rmv_virt_device() with eeh_rmv_device()
> * move the cfg_blocked check logic from pnv_eeh_read/write_config() to
> pnv_eeh_cfg_blocked()
> * move the vf reset/restore logic into its own patch, two patches are
> created.
> powerpc/powernv: Support PCI config restore for VFs
> powerpc/powernv: Support EEH reset for VFs
> * simplify the vf reset logic
>v2:
> * add prefix pci_iov_ to virtfn_add/virtfn_remove
> * use EEH_DEV_VF as a flag for a VF's eeh_dev
> * use eeh_dev instead of edev in change log
> * remove vf_index in eeh_dev, calculate it from pdn->busno and devfn
> * do eeh_add_device_late() and eeh_sysfs_add_device() both after pci_dev is
> well initialized
> * do FLR to reset a VF PE
> * imitate the restore function in FW for VF
> * remove the reverse order patch, since it is still under discussion
>
>Wei Yang (9):
> PCI/IOV: Rename and export virtfn_{add, remove}
> PCI: Add pcibios_bus_add_device() weak function
> powerpc/pci: Remove VFs prior to PF
> powerpc/eeh: Cache normal BARs, not windows or IOV BARs
> powerpc/eeh: EEH device for VF
> powerpc/eeh: Create PE for VFs
> powerpc/powernv: Support EEH reset for VF PE
> powerpc/powernv: Support PCI config restore for VFs
> powerpc/eeh: powerpc/eeh: Support error recovery for VF PE
>
> arch/powerpc/include/asm/eeh.h | 5 +
> arch/powerpc/include/asm/pci-bridge.h | 2 +
> arch/powerpc/kernel/eeh.c | 17 +-
> arch/powerpc/kernel/eeh_cache.c | 11 +-
> arch/powerpc/kernel/eeh_dev.c | 1 +
> arch/powerpc/kernel/eeh_driver.c | 137 ++++++++++++---
> arch/powerpc/kernel/eeh_pe.c | 10 +-
> arch/powerpc/kernel/pci-hotplug.c | 2 +-
> arch/powerpc/kernel/pci_dn.c | 19 ++-
> arch/powerpc/platforms/powernv/eeh-powernv.c | 238 ++++++++++++++++++++++++++-
> drivers/pci/bus.c | 3 +
> drivers/pci/iov.c | 10 +-
> include/linux/pci.h | 9 +
> 13 files changed, 417 insertions(+), 47 deletions(-)
>
>--
>2.1.0
>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
