Get the sdhc clock through the common clk APIs. If the APIs fail, try
to get the clock through 'clock-frequency' property. We could remove
the clock fixup in u-boot by adding the common clk APIs support.
Signed-off-by: Yangbo Lu <yangbo...@nxp.com>
---
drivers/mmc/host/sdhci-pltfm.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 072bb27..383fa49 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -31,6 +31,7 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/clk.h>
#ifdef CONFIG_PPC
#include <asm/machdep.h>
#endif
@@ -71,6 +72,7 @@ void sdhci_get_of_property(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct clk *sdhci_clk;
u32 bus_width;
if (of_get_property(np, "sdhci,auto-cmd12", NULL))
@@ -99,7 +101,11 @@ void sdhci_get_of_property(struct platform_device *pdev)
of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
- of_property_read_u32(np, "clock-frequency", &pltfm_host->clock);
+ sdhci_clk = of_clk_get(np, 0);
+ if (!IS_ERR(sdhci_clk))
+ pltfm_host->clock = clk_get_rate(sdhci_clk);
+ else
+ of_property_read_u32(np, "clock-frequency", &pltfm_host->clock);
if (of_find_property(np, "keep-power-in-suspend", NULL))
host->mmc->pm_caps |= MMC_PM_KEEP_POWER;
--
2.1.0.27.g96db324
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
