Hi Shreyas, On Tue, May 03, 2016 at 01:54:33PM +0530, Shreyas B. Prabhu wrote: > power7_powersave_common does common steps needed before entering idle > state and eventually changes MSR to MSR_IDLE and does rfid to > power7_enter_nap_mode. > > Make it more generic by passing the rfid address as a function parameter. > Also make function name more generic.
[..snip..] > > _GLOBAL(power7_winkle) > - li r3,3 > + li r3,PNV_THREAD_WINKLE This particular change above can go as an independent patch. > > _GLOBAL(power7_wakeup_tb_loss) > diff --git a/arch/powerpc/kernel/idle_power_common.S > b/arch/powerpc/kernel/idle_power_common.S > index 05954ae..ff7a541 100644 > --- a/arch/powerpc/kernel/idle_power_common.S > +++ b/arch/powerpc/kernel/idle_power_common.S > @@ -21,8 +21,10 @@ > * To check IRQ_HAPPENED in r4 > * 0 - don't check > * 1 - check > + * > + * Address to 'rfid' to in r5 > */ > -_GLOBAL(power7_powersave_common) > +_GLOBAL(power_powersave_common) > /* Use r3 to pass state nap/sleep/winkle */ > /* NAP is a state loss, we create a regs frame on the > * stack, fill it up with the state we care about and > @@ -79,13 +81,12 @@ _GLOBAL(power7_powersave_common) > * because as soon as we do that, another thread can switch > * the MMU context to the guest. > */ > - LOAD_REG_IMMEDIATE(r5, MSR_IDLE) > + LOAD_REG_IMMEDIATE(r7, MSR_IDLE) > li r6, MSR_RI > andc r6, r9, r6 > - LOAD_REG_ADDR(r7, power7_enter_nap_mode) > mtmsrd r6, 1 /* clear RI before setting SRR0/1 */ > - mtspr SPRN_SRR0, r7 > - mtspr SPRN_SRR1, r5 > + mtspr SPRN_SRR0, r5 > + mtspr SPRN_SRR1, r7 > rfid > /* No return */ Any particular reason why you swapped the roles of r5 and r7 ? -- Thanks and Regards gautham. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev