On 12/19/07, Timur Tabi <[EMAIL PROTECTED]> wrote:
> sound/soc/fsl/fsl_ssi.c | 614 +++++++++++++++++++
> sound/soc/fsl/fsl_ssi.h | 224 +++++++
I'm confused about this part. You built a driver for the mpc8610 ssi
port. This port has a device tree entry.
+ [EMAIL PROTECTED] {
+ compatible = "fsl,ssi";
+ cell-index = <0>;
+ reg = <16000 100>;
+ interrupt-parent = <&mpic>;
+ interrupts = <3e 2>;
+ fsl,mode = "i2s-slave";
+ codec {
+ compatible = "cirrus,cs4270";
+ /* MCLK source is a stand-alone oscillator */
+ bus-frequency = <bb8000>;
+ };
+ };
But then you don't create an of_platform_driver for this device.
Instead you create one for the fabric driver, struct
of_platform_driver mpc8610_hpcd_of_driver, and directly link the SSI
driver into it.
+static struct of_device_id mpc8610_hpcd_match[] = {
+ {
+ .compatible = "fsl,ssi",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mpc8610_hpcd_match);
+
+static struct of_platform_driver mpc8610_hpcd_of_driver = {
+ .owner = THIS_MODULE,
+ .name = "mpc8610_hpcd",
+ .match_table = mpc8610_hpcd_match,
+ .probe = mpc8610_hpcd_probe,
+ .remove = mpc8610_hpcd_remove,
+};
static int mpc8610_hpcd_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
.....
machine_data->dai.cpu_dai = fsl_ssi_create_dai(&ssi_info);
Isn't this two separate drivers that have been combined into one
driver? Or does the fsl_ssi channel only work on the mpc8610_hpcd?
This is the problem of knowing how to load the fabric driver that I
was talking about in the other threads. A device that can occur on
more than one chip ".compatible = "fsl,ssi"," is being used to pull in
a platform specific fabric driver, "mpc8610_hpcd". You can use the
kernel config system to select the right driver for ".compatible =
"fsl,ssi"," that matches you hardware and compile it in.
But that doesn't work in my environment. My generic channel is
"fsl,i2s". I have four different systems booting off from a shared
network drive. Each of these systems needs the common "fsl,i2s" driver
but they all four need different fabric drivers.
--
Jon Smirl
[EMAIL PROTECTED]
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
