This patch splits par_io_config_pin so we can use it with GPIO LIB API.
Also add a comment regarding #ifdef CONFIG_PPC_85xx being legacy.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/qe_lib/qe_io.c | 60 +++++++++++++++++++++++------------
1 files changed, 39 insertions(+), 21 deletions(-)
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c
b/arch/powerpc/sysdev/qe_lib/qe_io.c
index e53ea4d..aef893b 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -37,6 +37,10 @@ struct port_regs {
__be32 cppar1; /* Pin assignment register */
__be32 cppar2; /* Pin assignment register */
#ifdef CONFIG_PPC_85xx
+ /*
+ * This is needed for legacy support only, should go away,
+ * because we started using per-bank gpio chips.
+ */
u8 pad[8];
#endif
};
@@ -63,28 +67,29 @@ int par_io_init(struct device_node *np)
return 0;
}
-int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
- int assignment, int has_irq)
+static void __par_io_config_pin(struct port_regs __iomem *par_io,
+ u8 pin, int dir, int open_drain,
+ int assignment, int has_irq)
{
- u32 pin_mask1bit, pin_mask2bits, new_mask2bits, tmp_val;
-
- if (!par_io)
- return -1;
+ u32 pin_mask1bit;
+ u32 pin_mask2bits;
+ u32 new_mask2bits;
+ u32 tmp_val;
/* calculate pin location for single and 2 bits information */
pin_mask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1)));
/* Set open drain, if required */
- tmp_val = in_be32(&par_io[port].cpodr);
+ tmp_val = in_be32(&par_io->cpodr);
if (open_drain)
- out_be32(&par_io[port].cpodr, pin_mask1bit | tmp_val);
+ out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
else
- out_be32(&par_io[port].cpodr, ~pin_mask1bit & tmp_val);
+ out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
/* define direction */
tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
- in_be32(&par_io[port].cpdir2) :
- in_be32(&par_io[port].cpdir1);
+ in_be32(&par_io->cpdir2) :
+ in_be32(&par_io->cpdir1);
/* get all bits mask for 2 bit per port */
pin_mask2bits = (u32) (0x3 << (NUM_OF_PINS -
@@ -96,36 +101,49 @@ int par_io_config_pin(u8 port, u8 pin, int dir, int
open_drain,
/* clear and set 2 bits mask */
if (pin > (NUM_OF_PINS / 2) - 1) {
- out_be32(&par_io[port].cpdir2,
+ out_be32(&par_io->cpdir2,
~pin_mask2bits & tmp_val);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io[port].cpdir2, new_mask2bits | tmp_val);
+ out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
} else {
- out_be32(&par_io[port].cpdir1,
+ out_be32(&par_io->cpdir1,
~pin_mask2bits & tmp_val);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io[port].cpdir1, new_mask2bits | tmp_val);
+ out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
}
/* define pin assignment */
tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
- in_be32(&par_io[port].cppar2) :
- in_be32(&par_io[port].cppar1);
+ in_be32(&par_io->cppar2) :
+ in_be32(&par_io->cppar1);
new_mask2bits = (u32) (assignment << (NUM_OF_PINS -
(pin % (NUM_OF_PINS / 2) + 1) * 2));
/* clear and set 2 bits mask */
if (pin > (NUM_OF_PINS / 2) - 1) {
- out_be32(&par_io[port].cppar2,
+ out_be32(&par_io->cppar2,
~pin_mask2bits & tmp_val);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io[port].cppar2, new_mask2bits | tmp_val);
+ out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
} else {
- out_be32(&par_io[port].cppar1,
+ out_be32(&par_io->cppar1,
~pin_mask2bits & tmp_val);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io[port].cppar1, new_mask2bits | tmp_val);
+ out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
}
+}
+
+/*
+ * This is "legacy" function that takes port number as an argument
+ * instead of pointer to the appropriate bank.
+ */
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq)
+{
+ if (!par_io || port >= num_par_io_ports)
+ return -EINVAL;
+ __par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
+ has_irq);
return 0;
}
EXPORT_SYMBOL(par_io_config_pin);
--
1.5.2.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
