This is a repost of the SBC8548 patches, as requested, which contains the dts-v1 patch and the pci exclude removal in addition to the original three 8548 patches. These are layered on top of the SBC8560 patches I'd sent yesterday (since they both go after the same Makefile/Kconfig etc).
The patches are as follows: 1) Add basic support for Wind River SBC8548 as powerpc This adds in the basic platform support file -- closely matching that which exists for the MPC8548CDS board. 2) Add device tree source for Wind River SBC8548 board This also closely matches what exists for the MPC8548CDS platform. The big difference here is that this board doesn't have physical access to PCI#2 and it doesn't have the CDS's bridges, i8259, peripherals, etc, so the dts is overall quite a bit smaller. I've believe I've got all aliases and the associated gianfar updates etc. that I'd somehow missed in the sbc8560 dts. 3) Add default .config file for Wind River SBC8548 This config gives basic serial console and ethernet support for doing an NFS root setup. The SBC8548 has one PCI-X slot, and a short PCI-e slot, so I've enabled PCI. 4) Convert device tree to be dts-v1 compatible Tag all the values/resources normally in hex with 0x; convert items like frequencies usually expressed in decimal to decimal; add the dts-v1 tag. 5) Remove PCI exclude device for sbc8548 and sbc8560 The exclude device doesn't need to filter out the PHB anymore, and since that was all it was doing, it can go entirely. Paul. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev