On Wed, Jan 09, 2008 at 12:49:31AM -0500, Paul Gortmaker wrote:
> This adds the device tree source for the Wind River SBC834x board.
> It is based on the MPC834x_MDS DTS, with the biggest difference being
> the lack of BCSR and the PCI2 that the MDS gets via the PIB. That,
> and this file is also dts-v1 format.
>
> Signed-off-by: Paul Gortmaker <[EMAIL PROTECTED]>
> ---
> arch/powerpc/boot/dts/sbc8349.dts | 247
> +++++++++++++++++++++++++++++++++++++
> 1 files changed, 247 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/sbc8349.dts
> b/arch/powerpc/boot/dts/sbc8349.dts
[snip]
> + [EMAIL PROTECTED] {
> + device_type = "watchdog";
> + compatible = "mpc83xx_wdt";
Grah! Hasn't someone fixed this so that the driver doesn't need the
crap device_type?
[snip]
> + [EMAIL PROTECTED] {
> + device_type = "spi";
> + compatible = "fsl_spi";
And again here.
[snip]
> + [EMAIL PROTECTED] {
> + device_type = "usb";
> + compatible = "fsl-usb2-mph";
And here.
[snip
> + /* May need to remove if on a part without crypto engine */
> + [EMAIL PROTECTED] {
> + device_type = "crypto";
> + model = "SEC2";
> + compatible = "talitos";
I'm almost certain this one was fixed, hasn't it been merged yet?
[snip]
> + ipic: [EMAIL PROTECTED] {
By generic names best practice this should be
"[EMAIL PROTECTED]", although that's probably not your error.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev