On 14.11.2016 13:13, Zubair Lutfullah Kakakhel wrote:
> The Xilinx interrupt controller driver is now available in drivers/irqchip.
> Switch to using that driver.
>
> Signed-off-by: Zubair Lutfullah Kakakhel <zubair.kakak...@imgtec.com>
> Acked-by: Michael Ellerman <m...@ellerman.id.au> (powerpc)
>
> ---
> V6 - V7
> Rebase to v4.9-rc5
>
> V5 -> V6 Added Acked-by Micheal Ellerman
>
> V5 New patch
>
> Tested on virtex440-ml507 using qemu
> ---
> arch/powerpc/include/asm/xilinx_intc.h | 2 +-
> arch/powerpc/platforms/40x/Kconfig | 1 +
> arch/powerpc/platforms/40x/virtex.c | 2 +-
> arch/powerpc/platforms/44x/Kconfig | 1 +
> arch/powerpc/platforms/44x/virtex.c | 2 +-
> arch/powerpc/sysdev/xilinx_intc.c | 211
> +--------------------------------
> drivers/irqchip/irq-xilinx-intc.c | 3 +-
> 7 files changed, 9 insertions(+), 213 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/xilinx_intc.h
> b/arch/powerpc/include/asm/xilinx_intc.h
> index 343612f..3192d7f 100644
> --- a/arch/powerpc/include/asm/xilinx_intc.h
> +++ b/arch/powerpc/include/asm/xilinx_intc.h
> @@ -14,7 +14,7 @@
> #ifdef __KERNEL__
>
> extern void __init xilinx_intc_init_tree(void);
> -extern unsigned int xilinx_intc_get_irq(void);
> +extern unsigned int xintc_get_irq(void);
>
> #endif /* __KERNEL__ */
> #endif /* _ASM_POWERPC_XILINX_INTC_H */
> diff --git a/arch/powerpc/platforms/40x/Kconfig
> b/arch/powerpc/platforms/40x/Kconfig
> index e3257f2..1d7c1b1 100644
> --- a/arch/powerpc/platforms/40x/Kconfig
> +++ b/arch/powerpc/platforms/40x/Kconfig
> @@ -64,6 +64,7 @@ config XILINX_VIRTEX_GENERIC_BOARD
> default n
> select XILINX_VIRTEX_II_PRO
> select XILINX_VIRTEX_4_FX
> + select XILINX_INTC
> help
> This option enables generic support for Xilinx Virtex based boards.
>
> diff --git a/arch/powerpc/platforms/40x/virtex.c
> b/arch/powerpc/platforms/40x/virtex.c
> index 91a08ea..e3d5e09 100644
> --- a/arch/powerpc/platforms/40x/virtex.c
> +++ b/arch/powerpc/platforms/40x/virtex.c
> @@ -48,7 +48,7 @@ define_machine(virtex) {
> .probe = virtex_probe,
> .setup_arch = xilinx_pci_init,
> .init_IRQ = xilinx_intc_init_tree,
> - .get_irq = xilinx_intc_get_irq,
> + .get_irq = xintc_get_irq,
> .restart = ppc4xx_reset_system,
> .calibrate_decr = generic_calibrate_decr,
> };
> diff --git a/arch/powerpc/platforms/44x/Kconfig
> b/arch/powerpc/platforms/44x/Kconfig
> index 48fc180..25b8d64 100644
> --- a/arch/powerpc/platforms/44x/Kconfig
> +++ b/arch/powerpc/platforms/44x/Kconfig
> @@ -241,6 +241,7 @@ config XILINX_VIRTEX440_GENERIC_BOARD
> depends on 44x
> default n
> select XILINX_VIRTEX_5_FXT
> + select XILINX_INTC
> help
> This option enables generic support for Xilinx Virtex based boards
> that use a 440 based processor in the Virtex 5 FXT FPGA architecture.
> diff --git a/arch/powerpc/platforms/44x/virtex.c
> b/arch/powerpc/platforms/44x/virtex.c
> index a7e0802..3eb13ed 100644
> --- a/arch/powerpc/platforms/44x/virtex.c
> +++ b/arch/powerpc/platforms/44x/virtex.c
> @@ -54,7 +54,7 @@ define_machine(virtex) {
> .probe = virtex_probe,
> .setup_arch = xilinx_pci_init,
> .init_IRQ = xilinx_intc_init_tree,
> - .get_irq = xilinx_intc_get_irq,
> + .get_irq = xintc_get_irq,
> .calibrate_decr = generic_calibrate_decr,
> .restart = ppc4xx_reset_system,
> };
> diff --git a/arch/powerpc/sysdev/xilinx_intc.c
> b/arch/powerpc/sysdev/xilinx_intc.c
> index 0f52d79..4a86dcf 100644
> --- a/arch/powerpc/sysdev/xilinx_intc.c
> +++ b/arch/powerpc/sysdev/xilinx_intc.c
> @@ -29,194 +29,7 @@
> #include <asm/processor.h>
> #include <asm/i8259.h>
> #include <asm/irq.h>
> -
> -/*
> - * INTC Registers
> - */
> -#define XINTC_ISR 0 /* Interrupt Status */
> -#define XINTC_IPR 4 /* Interrupt Pending */
> -#define XINTC_IER 8 /* Interrupt Enable */
> -#define XINTC_IAR 12 /* Interrupt Acknowledge */
> -#define XINTC_SIE 16 /* Set Interrupt Enable bits */
> -#define XINTC_CIE 20 /* Clear Interrupt Enable bits */
> -#define XINTC_IVR 24 /* Interrupt Vector */
> -#define XINTC_MER 28 /* Master Enable */
> -
> -static struct irq_domain *master_irqhost;
> -
> -#define XILINX_INTC_MAXIRQS (32)
> -
> -/* The following table allows the interrupt type, edge or level,
> - * to be cached after being read from the device tree until the interrupt
> - * is mapped
> - */
> -static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
> -
> -/* Map the interrupt type from the device tree to the interrupt types
> - * used by the interrupt subsystem
> - */
> -static unsigned char xilinx_intc_map_senses[] = {
> - IRQ_TYPE_EDGE_RISING,
> - IRQ_TYPE_EDGE_FALLING,
> - IRQ_TYPE_LEVEL_HIGH,
> - IRQ_TYPE_LEVEL_LOW,
> -};
> -
> -/*
> - * The interrupt controller is setup such that it doesn't work well with
> - * the level interrupt handler in the kernel because the handler acks the
> - * interrupt before calling the application interrupt handler. To deal with
> - * that, we use 2 different irq chips so that different functions can be
> - * used for level and edge type interrupts.
> - *
> - * IRQ Chip common (across level and edge) operations
> - */
> -static void xilinx_intc_mask(struct irq_data *d)
> -{
> - int irq = irqd_to_hwirq(d);
> - void * regs = irq_data_get_irq_chip_data(d);
> - pr_debug("mask: %d\n", irq);
> - out_be32(regs + XINTC_CIE, 1 << irq);
> -}
> -
> -static int xilinx_intc_set_type(struct irq_data *d, unsigned int flow_type)
> -{
> - return 0;
> -}
> -
> -/*
> - * IRQ Chip level operations
> - */
> -static void xilinx_intc_level_unmask(struct irq_data *d)
> -{
> - int irq = irqd_to_hwirq(d);
> - void * regs = irq_data_get_irq_chip_data(d);
> - pr_debug("unmask: %d\n", irq);
> - out_be32(regs + XINTC_SIE, 1 << irq);
> -
> - /* ack level irqs because they can't be acked during
> - * ack function since the handle_level_irq function
> - * acks the irq before calling the inerrupt handler
> - */
> - out_be32(regs + XINTC_IAR, 1 << irq);
> -}
> -
> -static struct irq_chip xilinx_intc_level_irqchip = {
> - .name = "Xilinx Level INTC",
> - .irq_mask = xilinx_intc_mask,
> - .irq_mask_ack = xilinx_intc_mask,
> - .irq_unmask = xilinx_intc_level_unmask,
> - .irq_set_type = xilinx_intc_set_type,
> -};
> -
> -/*
> - * IRQ Chip edge operations
> - */
> -static void xilinx_intc_edge_unmask(struct irq_data *d)
> -{
> - int irq = irqd_to_hwirq(d);
> - void *regs = irq_data_get_irq_chip_data(d);
> - pr_debug("unmask: %d\n", irq);
> - out_be32(regs + XINTC_SIE, 1 << irq);
> -}
> -
> -static void xilinx_intc_edge_ack(struct irq_data *d)
> -{
> - int irq = irqd_to_hwirq(d);
> - void * regs = irq_data_get_irq_chip_data(d);
> - pr_debug("ack: %d\n", irq);
> - out_be32(regs + XINTC_IAR, 1 << irq);
> -}
> -
> -static struct irq_chip xilinx_intc_edge_irqchip = {
> - .name = "Xilinx Edge INTC",
> - .irq_mask = xilinx_intc_mask,
> - .irq_unmask = xilinx_intc_edge_unmask,
> - .irq_ack = xilinx_intc_edge_ack,
> - .irq_set_type = xilinx_intc_set_type,
> -};
> -
> -/*
> - * IRQ Host operations
> - */
> -
> -/**
> - * xilinx_intc_xlate - translate virq# from device tree interrupts property
> - */
> -static int xilinx_intc_xlate(struct irq_domain *h, struct device_node *ct,
> - const u32 *intspec, unsigned int intsize,
> - irq_hw_number_t *out_hwirq,
> - unsigned int *out_flags)
> -{
> - if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
> - return -EINVAL;
> -
> - /* keep a copy of the interrupt type til the interrupt is mapped
> - */
> - xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
> -
> - /* Xilinx uses 2 interrupt entries, the 1st being the h/w
> - * interrupt number, the 2nd being the interrupt type, edge or level
> - */
> - *out_hwirq = intspec[0];
> - *out_flags = xilinx_intc_map_senses[intspec[1]];
> -
> - return 0;
> -}
> -static int xilinx_intc_map(struct irq_domain *h, unsigned int virq,
> - irq_hw_number_t irq)
> -{
> - irq_set_chip_data(virq, h->host_data);
> -
> - if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
> - xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
> - irq_set_chip_and_handler(virq, &xilinx_intc_level_irqchip,
> - handle_level_irq);
> - } else {
> - irq_set_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
> - handle_edge_irq);
> - }
> - return 0;
> -}
> -
> -static const struct irq_domain_ops xilinx_intc_ops = {
> - .map = xilinx_intc_map,
> - .xlate = xilinx_intc_xlate,
> -};
> -
> -struct irq_domain * __init
> -xilinx_intc_init(struct device_node *np)
> -{
> - struct irq_domain * irq;
> - void * regs;
> -
> - /* Find and map the intc registers */
> - regs = of_iomap(np, 0);
> - if (!regs) {
> - pr_err("xilinx_intc: could not map registers\n");
> - return NULL;
> - }
> -
> - /* Setup interrupt controller */
> - out_be32(regs + XINTC_IER, 0); /* disable all irqs */
> - out_be32(regs + XINTC_IAR, ~(u32) 0); /* Acknowledge pending irqs */
> - out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
> -
> - /* Allocate and initialize an irq_domain structure. */
> - irq = irq_domain_add_linear(np, XILINX_INTC_MAXIRQS, &xilinx_intc_ops,
> - regs);
> - if (!irq)
> - panic(__FILE__ ": Cannot allocate IRQ host\n");
> -
> - return irq;
> -}
> -
> -int xilinx_intc_get_irq(void)
> -{
> - void * regs = master_irqhost->host_data;
> - pr_debug("get_irq:\n");
> - return irq_linear_revmap(master_irqhost, in_be32(regs + XINTC_IVR));
> -}
> +#include <linux/irqchip.h>
>
> #if defined(CONFIG_PPC_I8259)
> /*
> @@ -265,31 +78,11 @@ static void __init xilinx_i8259_setup_cascade(void)
> static inline void xilinx_i8259_setup_cascade(void) { return; }
> #endif /* defined(CONFIG_PPC_I8259) */
>
> -static const struct of_device_id xilinx_intc_match[] __initconst = {
> - { .compatible = "xlnx,opb-intc-1.00.c", },
> - { .compatible = "xlnx,xps-intc-1.00.a", },
> - {}
> -};
> -
> /*
> * Initialize master Xilinx interrupt controller
> */
> void __init xilinx_intc_init_tree(void)
> {
> - struct device_node *np;
> -
> - /* find top level interrupt controller */
> - for_each_matching_node(np, xilinx_intc_match) {
> - if (!of_get_property(np, "interrupts", NULL))
> - break;
> - }
> - BUG_ON(!np);
> -
> - master_irqhost = xilinx_intc_init(np);
> - BUG_ON(!master_irqhost);
> -
> - irq_set_default_host(master_irqhost);
> - of_node_put(np);
> -
> + irqchip_init();
> xilinx_i8259_setup_cascade();
> }
> diff --git a/drivers/irqchip/irq-xilinx-intc.c
> b/drivers/irqchip/irq-xilinx-intc.c
> index d330917..3db7ab1 100644
> --- a/drivers/irqchip/irq-xilinx-intc.c
> +++ b/drivers/irqchip/irq-xilinx-intc.c
> @@ -237,4 +237,5 @@ static int __init xilinx_intc_of_init(struct device_node
> *intc,
>
> }
>
> -IRQCHIP_DECLARE(xilinx_intc, "xlnx,xps-intc-1.00.a", xilinx_intc_of_init);
> +IRQCHIP_DECLARE(xilinx_intc_xps, "xlnx,xps-intc-1.00.a",
> xilinx_intc_of_init);
> +IRQCHIP_DECLARE(xilinx_intc_opb, "xlnx,opb-intc-1.00.c",
> xilinx_intc_of_init);
>
Looks reasonable.
Acked-by: Michal Simek <michal.si...@xilinx.com>
Thanks,
Michal
