Currently there are several dts that don't specify address or size
cells for the muram. This causes dtc to use default values, one of
which is an address-cells of two, and this breaks the parsing of the
muram ranges, which is assuming an address-cells of one. For example:
Warning (reg_format): "reg" property in
/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] has invalid length
(8 bytes) (#address-cells == 2, #size-cells == 1)
Explicitly setting the address and size cells gets it parsed properly
and gets rid of the four dtc warnings.
Signed-off-by: Paul Gortmaker <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/mpc836x_mds.dts | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts
b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 2181d2c..10b5d6d 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -214,10 +214,12 @@
bus-frequency = <179A7B00>;
[EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "muram";
ranges = <0 00010000 0000c000>;
- [EMAIL PROTECTED]
+ [EMAIL PROTECTED] {
reg = <0 c000>;
};
};
--
1.5.4.rc4.gcab31
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev