On Wed, 2017-11-15 at 13:47 +1100, Daniel Axtens wrote:
> Hi Bryant,
>
> This looks a bit better, but...
>
> > The following patch ensures that the bounce_buffer is not null
> > prior to using it within skb_copy_from_linear_data.
>
> How would this occur?
>
> Looking at ibmveth.c, I see bounce_buffer being freed in ibmveth_close()
> and allocated in ibmveth_open() only. If allocation fails, the whole
> opening of the device fails with -ENOMEM.
>
> It seems your test case - changing TSO - causes ibmveth_set_tso() to
> cause an adaptor restart - an ibmveth_close(dev) and then an
> ibmveth_open(dev). Is this happening in parallel with an out of memory
> condition - is the memory allocation failing?
>
> Alternatively, could it be the case that you're closing the device while
> packets are in flight, and then trying to use a bounce_buffer that's
> been freed elsewhere? Do you need to decouple memory freeing from
> ibmveth_close?
Hrm, you should at least stop the tx queue and NAPI (and synchronize)
while doing a reset. A lot of drivers, rather than doing close/open
(which does subtly different things) tend to instead fire a work queue
(often called reset_task) which does the job (and uses the same lower
level helpers as open/close to free/allocate the rings etc...).
> > The problem can be recreated toggling on/off Large send offload.
> >
> > The following script when run (along with some iperf traffic recreates the
> > crash within 5-10 mins or so).
> >
> > while true
> > do
> > ethtool -k ibmveth0 | grep tcp-segmentation-offload
> > ethtool -K ibmveth0 tso off
> > ethtool -k ibmveth0 | grep tcp-segmentation-offload
> > ethtool -K ibmveth0 tso on
> > done
> >
> > Note: This issue happens the very first time largsesend offload is
> > turned off too (but the above script recreates the issue all the times)
> >
> > [76563.914173] Unable to handle kernel paging request for data at address
> > 0x00000000
> > [76563.914197] Faulting instruction address: 0xc000000000063940
> > [76563.914205] Oops: Kernel access of bad area, sig: 11 [#1]
> > [76563.914210] SMP NR_CPUS=2048 NUMA pSeries
> > [76563.914217] Modules linked in: rpadlpar_io rpaphp dccp_diag dccp
> > tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag nls_utf8
> > isofs binfmt_misc pseries_rng rtc_generic autofs4 ibmvfc scsi_transport_fc
> > ibmvscsi ibmveth
> > [76563.914251] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.4.0-34-generic
> > #53-Ubuntu
>
> ^--- yikes!
>
> There are relevant changes to this area since 4.4:
> 2c42bf4b4317 ("ibmveth: check return of skb_linearize in ibmveth_start_xmit")
> 66aa0678efc2 ("ibmveth: Support to enable LSO/CSO for Trunk VEA.")
>
> Does this crash occurs on a more recent kernel?
>
> > diff --git a/drivers/net/ethernet/ibm/ibmveth.c
> > b/drivers/net/ethernet/ibm/ibmveth.c
> > index f210398200ece..1d29b1649118d 100644
> > --- a/drivers/net/ethernet/ibm/ibmveth.c
> > +++ b/drivers/net/ethernet/ibm/ibmveth.c
> > @@ -1092,8 +1092,14 @@ static netdev_tx_t ibmveth_start_xmit(struct sk_buff
> > *skb,
> > */
> > if (force_bounce || (!skb_is_nonlinear(skb) &&
> > (skb->len < tx_copybreak))) {
> > - skb_copy_from_linear_data(skb, adapter->bounce_buffer,
> > - skb->len);
> > + if (adapter->bounce_buffer) {
> > + skb_copy_from_linear_data(skb, adapter->bounce_buffer,
> > + skb->len);
> > + } else {
> > + adapter->tx_send_failed++;
> > + netdev->stats.tx_dropped++;
> > + goto out;
>
> Finally, as I alluded to at the top of this message, isn't the
> disappearance of the bounce-buffer a pretty serious issue? As I
> understand it, it means your data structures are now inconsistent. Do
> you need to - at the least - be more chatty here?
>
> Regards,
> Daniel
> > + }
> >
> > descs[0].fields.flags_len = desc_flags | skb->len;
> > descs[0].fields.address = adapter->bounce_buffer_dma;
> > --
> > 2.13.6 (Apple Git-96)
