On Fri, 2018-08-31 at 06:12 +0000, Andy Tang wrote:
> Hi Scott,
> 
> Please see my replay inline.
> 
> > -----Original Message-----
> > From: linux-arm-kernel <[email protected]>
> > On Behalf Of Scott Wood
> > Sent: 2018年8月31日 1:43
> > To: Vabhav Sharma <[email protected]>;
> > [email protected]; [email protected];
> > [email protected]; [email protected];
> > [email protected]; [email protected];
> > [email protected]; [email protected]; [email protected];
> > [email protected]; [email protected];
> > [email protected]; [email protected];
> > [email protected]; [email protected];
> > [email protected]; [email protected];
> > [email protected]; [email protected]
> > Cc: Yogesh Narayan Gaur <[email protected]>; Andy Tang
> > <[email protected]>; [email protected]; Varun Sethi
> > <[email protected]>; Udit Kumar <[email protected]>
> > Subject: Re: [PATCH 3/5] drivers: clk-qoriq: Add clockgen support for
> > lx2160a
> > 
> > On Thu, 2018-08-30 at 12:39 -0500, Scott Wood wrote:
> > > On Thu, 2018-08-30 at 07:36 +0000, Vabhav Sharma wrote:
> > > > > 
> > > > > Why are you increasing NUM_CMUX beyond 8 for a chip that only
> > 
> > has
> > > > > 8 entries in cmux_to_group?
> > > > 
> > > > Configuration is 16 cores,8 cluster with 2 cores in each cluster
> > > 
> > > So?  This is about cmuxes, not cores.  You're increasing the array
> > > without ever using the new size.
> > 
> > Oh, and you also broke p4080 which has 8 cmuxes but no -1 terminator,
> > because the array was of length 8.  Probably the array should be changed
> > to NUM_CMUX+1 so every array can be -1 terminated.
> > 
> 
> [Andy] How about we add -1 terminator to p4080 and increase NUM_CMUX to 16?

Why 16?  What does such a change have to do with this chip, which according to
the rest of the patch has 8 cmuxes?

> We don't want to increase NUM_CMUX each time new soc with more cmuxes added.

You don't want to have to make a trivial change each time you exceed a limit
that has yet to be exceeded once since NUM_CMUX was added?  This isn't ABI or
in any other way hard to change.  It's right in the same file as the chip
description you'd be adding.

And even if a chip did come along with 16 cmuxes, you'd then need to increase
the array to 17 to hold the -1 if you don't want to leave a situation like the
p4080 is in now, where a chip's cmux array could be broken by increasing
NUM_CMUX further.

-Scott

Reply via email to