When printing the machine check cause, the cause appears on the
following line due to bad use of printk without \n:

[   33.663993] Machine check in kernel mode.
[   33.664011] Caused by (from SRR1=9032):
[   33.664036] Data access error at address c90c8000

This patch fixes it by using pr_cont() for the second part:

[  133.258131] Machine check in kernel mode.
[  133.258146] Caused by (from SRR1=9032): Data access error at address c90c8000

Signed-off-by: Christophe Leroy <[email protected]>
---
 arch/powerpc/kernel/traps.c                | 78 +++++++++++++++---------------
 arch/powerpc/platforms/8xx/machine_check.c |  4 +-
 2 files changed, 41 insertions(+), 41 deletions(-)

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 4f880c2a6e4c..39fde4b40b6e 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -535,10 +535,10 @@ int machine_check_e500mc(struct pt_regs *regs)
        printk("Caused by (from MCSR=%lx): ", reason);
 
        if (reason & MCSR_MCP)
-               printk("Machine Check Signal\n");
+               pr_cont("Machine Check Signal\n");
 
        if (reason & MCSR_ICPERR) {
-               printk("Instruction Cache Parity Error\n");
+               pr_cont("Instruction Cache Parity Error\n");
 
                /*
                 * This is recoverable by invalidating the i-cache.
@@ -556,7 +556,7 @@ int machine_check_e500mc(struct pt_regs *regs)
        }
 
        if (reason & MCSR_DCPERR_MC) {
-               printk("Data Cache Parity Error\n");
+               pr_cont("Data Cache Parity Error\n");
 
                /*
                 * In write shadow mode we auto-recover from the error, but it
@@ -575,38 +575,38 @@ int machine_check_e500mc(struct pt_regs *regs)
        }
 
        if (reason & MCSR_L2MMU_MHIT) {
-               printk("Hit on multiple TLB entries\n");
+               pr_cont("Hit on multiple TLB entries\n");
                recoverable = 0;
        }
 
        if (reason & MCSR_NMI)
-               printk("Non-maskable interrupt\n");
+               pr_cont("Non-maskable interrupt\n");
 
        if (reason & MCSR_IF) {
-               printk("Instruction Fetch Error Report\n");
+               pr_cont("Instruction Fetch Error Report\n");
                recoverable = 0;
        }
 
        if (reason & MCSR_LD) {
-               printk("Load Error Report\n");
+               pr_cont("Load Error Report\n");
                recoverable = 0;
        }
 
        if (reason & MCSR_ST) {
-               printk("Store Error Report\n");
+               pr_cont("Store Error Report\n");
                recoverable = 0;
        }
 
        if (reason & MCSR_LDG) {
-               printk("Guarded Load Error Report\n");
+               pr_cont("Guarded Load Error Report\n");
                recoverable = 0;
        }
 
        if (reason & MCSR_TLBSYNC)
-               printk("Simultaneous tlbsync operations\n");
+               pr_cont("Simultaneous tlbsync operations\n");
 
        if (reason & MCSR_BSL2_ERR) {
-               printk("Level 2 Cache Error\n");
+               pr_cont("Level 2 Cache Error\n");
                recoverable = 0;
        }
 
@@ -616,7 +616,7 @@ int machine_check_e500mc(struct pt_regs *regs)
                addr = mfspr(SPRN_MCAR);
                addr |= (u64)mfspr(SPRN_MCARU) << 32;
 
-               printk("Machine Check %s Address: %#llx\n",
+               pr_cont("Machine Check %s Address: %#llx\n",
                       reason & MCSR_MEA ? "Effective" : "Physical", addr);
        }
 
@@ -640,29 +640,29 @@ int machine_check_e500(struct pt_regs *regs)
        printk("Caused by (from MCSR=%lx): ", reason);
 
        if (reason & MCSR_MCP)
-               printk("Machine Check Signal\n");
+               pr_cont("Machine Check Signal\n");
        if (reason & MCSR_ICPERR)
-               printk("Instruction Cache Parity Error\n");
+               pr_cont("Instruction Cache Parity Error\n");
        if (reason & MCSR_DCP_PERR)
-               printk("Data Cache Push Parity Error\n");
+               pr_cont("Data Cache Push Parity Error\n");
        if (reason & MCSR_DCPERR)
-               printk("Data Cache Parity Error\n");
+               pr_cont("Data Cache Parity Error\n");
        if (reason & MCSR_BUS_IAERR)
-               printk("Bus - Instruction Address Error\n");
+               pr_cont("Bus - Instruction Address Error\n");
        if (reason & MCSR_BUS_RAERR)
-               printk("Bus - Read Address Error\n");
+               pr_cont("Bus - Read Address Error\n");
        if (reason & MCSR_BUS_WAERR)
-               printk("Bus - Write Address Error\n");
+               pr_cont("Bus - Write Address Error\n");
        if (reason & MCSR_BUS_IBERR)
-               printk("Bus - Instruction Data Error\n");
+               pr_cont("Bus - Instruction Data Error\n");
        if (reason & MCSR_BUS_RBERR)
-               printk("Bus - Read Data Bus Error\n");
+               pr_cont("Bus - Read Data Bus Error\n");
        if (reason & MCSR_BUS_WBERR)
-               printk("Bus - Write Data Bus Error\n");
+               pr_cont("Bus - Write Data Bus Error\n");
        if (reason & MCSR_BUS_IPERR)
-               printk("Bus - Instruction Parity Error\n");
+               pr_cont("Bus - Instruction Parity Error\n");
        if (reason & MCSR_BUS_RPERR)
-               printk("Bus - Read Parity Error\n");
+               pr_cont("Bus - Read Parity Error\n");
 
        return 0;
 }
@@ -680,19 +680,19 @@ int machine_check_e200(struct pt_regs *regs)
        printk("Caused by (from MCSR=%lx): ", reason);
 
        if (reason & MCSR_MCP)
-               printk("Machine Check Signal\n");
+               pr_cont("Machine Check Signal\n");
        if (reason & MCSR_CP_PERR)
-               printk("Cache Push Parity Error\n");
+               pr_cont("Cache Push Parity Error\n");
        if (reason & MCSR_CPERR)
-               printk("Cache Parity Error\n");
+               pr_cont("Cache Parity Error\n");
        if (reason & MCSR_EXCP_ERR)
-               printk("ISI, ITLB, or Bus Error on first instruction fetch for 
an exception handler\n");
+               pr_cont("ISI, ITLB, or Bus Error on first instruction fetch for 
an exception handler\n");
        if (reason & MCSR_BUS_IRERR)
-               printk("Bus - Read Bus Error on instruction fetch\n");
+               pr_cont("Bus - Read Bus Error on instruction fetch\n");
        if (reason & MCSR_BUS_DRERR)
-               printk("Bus - Read Bus Error on data load\n");
+               pr_cont("Bus - Read Bus Error on data load\n");
        if (reason & MCSR_BUS_WRERR)
-               printk("Bus - Write Bus Error on buffered store or cache line 
push\n");
+               pr_cont("Bus - Write Bus Error on buffered store or cache line 
push\n");
 
        return 0;
 }
@@ -705,30 +705,30 @@ int machine_check_generic(struct pt_regs *regs)
        printk("Caused by (from SRR1=%lx): ", reason);
        switch (reason & 0x601F0000) {
        case 0x80000:
-               printk("Machine check signal\n");
+               pr_cont("Machine check signal\n");
                break;
        case 0:         /* for 601 */
        case 0x40000:
        case 0x140000:  /* 7450 MSS error and TEA */
-               printk("Transfer error ack signal\n");
+               pr_cont("Transfer error ack signal\n");
                break;
        case 0x20000:
-               printk("Data parity error signal\n");
+               pr_cont("Data parity error signal\n");
                break;
        case 0x10000:
-               printk("Address parity error signal\n");
+               pr_cont("Address parity error signal\n");
                break;
        case 0x20000000:
-               printk("L1 Data Cache error\n");
+               pr_cont("L1 Data Cache error\n");
                break;
        case 0x40000000:
-               printk("L1 Instruction Cache error\n");
+               pr_cont("L1 Instruction Cache error\n");
                break;
        case 0x00100000:
-               printk("L2 data cache parity error\n");
+               pr_cont("L2 data cache parity error\n");
                break;
        default:
-               printk("Unknown values in msr\n");
+               pr_cont("Unknown values in msr\n");
        }
        return 0;
 }
diff --git a/arch/powerpc/platforms/8xx/machine_check.c 
b/arch/powerpc/platforms/8xx/machine_check.c
index 402016705a39..9944fc303df0 100644
--- a/arch/powerpc/platforms/8xx/machine_check.c
+++ b/arch/powerpc/platforms/8xx/machine_check.c
@@ -18,9 +18,9 @@ int machine_check_8xx(struct pt_regs *regs)
        pr_err("Machine check in kernel mode.\n");
        pr_err("Caused by (from SRR1=%lx): ", reason);
        if (reason & 0x40000000)
-               pr_err("Fetch error at address %lx\n", regs->nip);
+               pr_cont("Fetch error at address %lx\n", regs->nip);
        else
-               pr_err("Data access error at address %lx\n", regs->dar);
+               pr_cont("Data access error at address %lx\n", regs->dar);
 
 #ifdef CONFIG_PCI
        /* the qspan pci read routines can cause machine checks -- Cort
-- 
2.13.3

Reply via email to