Le 11/06/2019 à 09:24, Michael Neuling a écrit :
On Tue, 2019-06-11 at 08:48 +0200, Cédric Le Goater wrote:
On 11/06/2019 08:44, Michael Neuling wrote:
2:
-BEGIN_FTR_SECTION
- /* POWER9 with disabled DAWR */
+ LOAD_REG_ADDR(r11, dawr_force_enable)
+ lbz r11, 0(r11)
+ cmpdi r11, 0
li r3, H_HARDWARE
- blr
-END_FTR_SECTION_IFCLR(CPU_FTR_DAWR)
+ beqlr
Why is this a 'beqlr' ? Shouldn't it be a blr ?
I believe it's right and should be a beqlr. It's to replace the FTR section to
make it dynamic based on the dawr_force_enable bit.
hmm, see the crash below on a L1 running a nested guest. r3 is set
to -1 (H_HARDWARE) but a vpcu pointer was expected. How can we fix
this ?
C.
[ 44.374746] BUG: Kernel NULL pointer dereference at 0x000013bf
[ 44.374848] Faulting instruction address: 0xc00000000010b044
[ 44.374906] Oops: Kernel access of bad area, sig: 11 [#1]
[ 44.374951] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
[ 44.375018] Modules linked in: vhost_net vhost tap xt_CHECKSUM
iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack
nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp
bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables
iptable_filter bpfilter vmx_crypto crct10dif_vpmsum crc32c_vpmsum kvm_hv kvm
sch_fq_codel ip_tables x_tables autofs4 virtio_net net_failover virtio_scsi
failover
[ 44.375401] CPU: 8 PID: 1771 Comm: qemu-system-ppc Kdump: loaded Not tainted
5.2.0-rc4+ #3
[ 44.375500] NIP: c00000000010b044 LR: c0080000089dacf4 CTR: c00000000010aff4
[ 44.375604] REGS: c00000179b397710 TRAP: 0300 Not tainted (5.2.0-rc4+)
[ 44.375691] MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR:
42244842 XER: 00000000
[ 44.375815] CFAR: c00000000010aff8 DAR: 00000000000013bf DSISR: 42000000
IRQMASK: 0
[ 44.375815] GPR00: c0080000089dd6bc c00000179b3979a0 c008000008a04300
ffffffffffffffff
[ 44.375815] GPR04: 0000000000000000 0000000000000003 000000002444b05d
c0000017f11c45d0
[ 44.375815] GPR08: 078000003e018dfe 0000000000000028 0000000000000001
0000000000000075
[ 44.375815] GPR12: c00000000010aff4 c000000007ff6300 0000000000000000
0000000000000000
[ 44.375815] GPR16: 0000000000000000 c0000017f11d0000 00000000ffffffff
c0000017f11ca7a8
[ 44.375815] GPR20: c0000017f11c42ec ffffffffffffffff 0000000000000000
000000000000000a
[ 44.375815] GPR24: fffffffffffffffc 0000000000000000 c0000017f11c0000
c000000001a77ed8
[ 44.375815] GPR28: c00000179af70000 fffffffffffffffc c0080000089ff170
c00000179ae88540
[ 44.376673] NIP [c00000000010b044] kvmppc_h_set_dabr+0x50/0x68
[ 44.376754] LR [c0080000089dacf4] kvmppc_pseries_do_hcall+0xa3c/0xeb0
[kvm_hv]
[ 44.376849] Call Trace:
[ 44.376886] [c00000179b3979a0] [c0000017f11c0000] 0xc0000017f11c0000
(unreliable)
[ 44.376982] [c00000179b397a10] [c0080000089dd6bc]
kvmppc_vcpu_run_hv+0x694/0xec0 [kvm_hv]
[ 44.377084] [c00000179b397ae0] [c0080000093f8bcc] kvmppc_vcpu_run+0x34/0x48
[kvm]
[ 44.377185] [c00000179b397b00] [c0080000093f522c]
kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm]
[ 44.377286] [c00000179b397b90] [c0080000093e3618] kvm_vcpu_ioctl+0x460/0x850
[kvm]
[ 44.377384] [c00000179b397d00] [c0000000004ba6c4] do_vfs_ioctl+0xe4/0xb40
[ 44.377464] [c00000179b397db0] [c0000000004bb1e4] ksys_ioctl+0xc4/0x110
[ 44.377547] [c00000179b397e00] [c0000000004bb258] sys_ioctl+0x28/0x80
[ 44.377628] [c00000179b397e20] [c00000000000b888] system_call+0x5c/0x70
[ 44.377712] Instruction dump:
[ 44.377765] 4082fff4 4c00012c 38600000 4e800020 e96280c0 896b0000 2c2b0000
3860ffff
[ 44.377862] 4d820020 50852e74 508516f6 78840724 <f88313c0> f8a313c8 7c942ba6
7cbc2ba6
Opps, it's because I corrupted r3 :-(
Does this fix it?
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 139027c62d..f781ee1458 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -2519,8 +2519,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
LOAD_REG_ADDR(r11, dawr_force_enable)
lbz r11, 0(r11)
cmpdi r11, 0
+ bne 3f
li r3, H_HARDWARE
- beqlr
+ blr
+3:
Or you could copy r3 into another unused volatile register and use it
instead of r3 below.
Christophe
/* Emulate H_SET_DABR/X on P8 for the sake of compat mode guests */
rlwimi r5, r4, 5, DAWRX_DR | DAWRX_DW
rlwimi r5, r4, 2, DAWRX_WT
