On Fri, Jul 05, 2019 at 07:03:47AM +0000, S.j. Wang wrote: > > > > > + > > > + /* restore registers by regcache_sync */ > > > + fsl_esai_register_restore(esai_priv); > > > + > > > + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, > > > + ESAI_xCR_xPR_MASK, 0); > > > + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, > > > + ESAI_xCR_xPR_MASK, 0); > > > > And just for curious, can (or shall) we stuff this personal reset to the > > reset() > > function? I found this one is a part of the reset routine being mentioned in > > the RM -- it was done after ESAI reset is done via ECR register. > > > > There is a problem to do this, TPR/RPR need to be clear after configure the > control > register. (TCCR, TCR). So it seems not only one place (reset function) need > to be > changed.
Do you know (or remember) why we suddenly involve this TPR/PRP? The driver has no problem so far, even if we don't have them. The "personal reset" sounds like a feature that we would use to reset TX or RX individually, while this hw_reset() does a full reset for both TX and RX. So I wonder whether they're necessary.