[PATCH] powerpc/kmcent2: update the ethernet devices' phy properties

[Valentin Longchamp]

Change all phy-connection-type properties to phy-mode that are better
supported by the fman driver.

Use the more readable fixed-link node for the 2 sgmii links.

Change the RGMII link to rgmii-id as the clock delays are added by the
phy.

Signed-off-by: Valentin Longchamp <valen...@longchamp.me>
---
 arch/powerpc/boot/dts/fsl/kmcent2.dts | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/kmcent2.dts 
b/arch/powerpc/boot/dts/fsl/kmcent2.dts
index 48b7f9797124..c3e0741cafb1 100644
--- a/arch/powerpc/boot/dts/fsl/kmcent2.dts
+++ b/arch/powerpc/boot/dts/fsl/kmcent2.dts
@@ -210,13 +210,19 @@
 
                fman@400000 {
                        ethernet@e0000 {
-                               fixed-link = <0 1 1000 0 0>;
-                               phy-connection-type = "sgmii";
+                               phy-mode = "sgmii";
+                               fixed-link {
+                                       speed = <1000>;
+                                       full-duplex;
+                               };
                        };
 
                        ethernet@e2000 {
-                               fixed-link = <1 1 1000 0 0>;
-                               phy-connection-type = "sgmii";
+                               phy-mode = "sgmii";
+                               fixed-link {
+                                       speed = <1000>;
+                                       full-duplex;
+                               };
                        };
 
                        ethernet@e4000 {
@@ -229,7 +235,7 @@
 
                        ethernet@e8000 {
                                phy-handle = <&front_phy>;
-                               phy-connection-type = "rgmii";
+                               phy-mode = "rgmii-id";
                        };
 
                        mdio0: mdio@fc000 {
-- 
2.17.1