Neither pnv_npu_try_dma_set_bypass nor the pnv_npu_dma_set_32 and
pnv_npu_dma_set_bypass helpers called by it are used anywhere in the
kernel tree, so remove them.

Signed-off-by: Christoph Hellwig <[email protected]>
---
 arch/powerpc/platforms/powernv/npu-dma.c | 99 ------------------------
 1 file changed, 99 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/npu-dma.c 
b/arch/powerpc/platforms/powernv/npu-dma.c
index c16249d251f1..a570a249edc3 100644
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -192,105 +192,6 @@ static long pnv_npu_unset_window(struct iommu_table_group 
*table_group, int num)
        return 0;
 }
 
-/*
- * Enables 32 bit DMA on NPU.
- */
-static void pnv_npu_dma_set_32(struct pnv_ioda_pe *npe)
-{
-       struct pci_dev *gpdev;
-       struct pnv_ioda_pe *gpe;
-       int64_t rc;
-
-       /*
-        * Find the assoicated PCI devices and get the dma window
-        * information from there.
-        */
-       if (!npe->pdev || !(npe->flags & PNV_IODA_PE_DEV))
-               return;
-
-       gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
-       if (!gpe)
-               return;
-
-       rc = pnv_npu_set_window(&npe->table_group, 0,
-                       gpe->table_group.tables[0]);
-
-       /*
-        * NVLink devices use the same TCE table configuration as
-        * their parent device so drivers shouldn't be doing DMA
-        * operations directly on these devices.
-        */
-       set_dma_ops(&npe->pdev->dev, &dma_dummy_ops);
-}
-
-/*
- * Enables bypass mode on the NPU. The NPU only supports one
- * window per link, so bypass needs to be explicitly enabled or
- * disabled. Unlike for a PHB3 bypass and non-bypass modes can't be
- * active at the same time.
- */
-static int pnv_npu_dma_set_bypass(struct pnv_ioda_pe *npe)
-{
-       struct pnv_phb *phb = npe->phb;
-       int64_t rc = 0;
-       phys_addr_t top = memblock_end_of_DRAM();
-
-       if (phb->type != PNV_PHB_NPU_NVLINK || !npe->pdev)
-               return -EINVAL;
-
-       rc = pnv_npu_unset_window(&npe->table_group, 0);
-       if (rc != OPAL_SUCCESS)
-               return rc;
-
-       /* Enable the bypass window */
-
-       top = roundup_pow_of_two(top);
-       dev_info(&npe->pdev->dev, "Enabling bypass for PE %x\n",
-                       npe->pe_number);
-       rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
-                       npe->pe_number, npe->pe_number,
-                       0 /* bypass base */, top);
-
-       if (rc == OPAL_SUCCESS)
-               pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
-       return rc;
-}
-
-void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass)
-{
-       int i;
-       struct pnv_phb *phb;
-       struct pci_dn *pdn;
-       struct pnv_ioda_pe *npe;
-       struct pci_dev *npdev;
-
-       for (i = 0; ; ++i) {
-               npdev = pnv_pci_get_npu_dev(gpdev, i);
-
-               if (!npdev)
-                       break;
-
-               pdn = pci_get_pdn(npdev);
-               if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
-                       return;
-
-               phb = pci_bus_to_host(npdev->bus)->private_data;
-
-               /* We only do bypass if it's enabled on the linked device */
-               npe = &phb->ioda.pe_array[pdn->pe_number];
-
-               if (bypass) {
-                       dev_info(&npdev->dev,
-                                       "Using 64-bit DMA iommu bypass\n");
-                       pnv_npu_dma_set_bypass(npe);
-               } else {
-                       dev_info(&npdev->dev, "Using 32-bit DMA via iommu\n");
-                       pnv_npu_dma_set_32(npe);
-               }
-       }
-}
-
 #ifdef CONFIG_IOMMU_API
 /* Switch ownership from platform code to external user (e.g. VFIO) */
 static void pnv_npu_take_ownership(struct iommu_table_group *table_group)
-- 
2.20.1

Reply via email to