On Thu, 3 Apr 2008 14:08:42 -0700 (PDT) Roland McGrath <[EMAIL PROTECTED]> wrote:
> This requires the earlier HAVE_SET_RESTORE_SIGMASK patch series. > This does the same for powerpc that I posted the x86 change for. > > --- > Replace TIF_RESTORE_SIGMASK with TLF_RESTORE_SIGMASK and define > our own set_restore_sigmask() function. This saves the costly > SMP-safe set_bit operation, which we do not need for the sigmask > flag since TIF_SIGPENDING always has to be set too. > > Signed-off-by: Roland McGrath <[EMAIL PROTECTED]> > --- > arch/powerpc/kernel/entry_32.S | 4 ++-- > arch/powerpc/kernel/signal.c | 12 ++++++------ > arch/powerpc/kernel/signal_32.c | 2 +- > include/asm-powerpc/thread_info.h | 17 +++++++++++++---- > 4 files changed, 22 insertions(+), 13 deletions(-) This crashes my powerpc mac g5. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Unable to handle kernel paging request for data at address 0x0000003d Faulting instruction address: 0xc0000000000dbc3c Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=4 PowerMac Modules linked in: autofs NIP: c0000000000dbc3c LR: c0000000000dbda8 CTR: c0000000000dbd40 REGS: c000000178607a70 TRAP: 0300 Not tainted (2.6.25-rc8-mm2) MSR: 9000000000009032 <EE,ME,IR,DR> CR: 42284448 XER: 20000000 DAR: 000000000000003d, DSISR: 0000000040000000 TASK = c000000178f792e0[2488] 'zsh' THREAD: c000000178604000 CPU: 0 GPR00: c0000000000dbda8 c000000178607cf0 c0000000006df7e8 000000000000000d GPR04: 0000000000000000 0000000000000001 00000000ffb46c08 0000000000000001 GPR08: 00000000f7ff8000 c000000178607ea0 c0000000000dbd40 000000000000000d GPR12: 100000000000d032 c000000000622e80 0000000010090000 0000000000000000 GPR16: 0000000000000001 0000000010090000 0000000010092ff8 00000000100ac34c GPR20: 0000000000000000 0000000000000001 0000000000000000 0000000000000001 GPR24: 0000000000000000 00000000ffb46c08 000000000000000d 0000000000000000 GPR28: 0000000000000000 0000000000000001 c00000000068ff50 ffffffffffffffea NIP [c0000000000dbc3c] .vfs_llseek+0x1c/0x84 LR [c0000000000dbda8] .sys_llseek+0x68/0xf0 Call Trace: [c000000178607cf0] [c00000000009e210] .audit_syscall_exit+0x3fc/0x40c (unreliable) [c000000178607d70] [c0000000000dbda8] .sys_llseek+0x68/0xf0 [c000000178607e30] [c00000000000872c] syscall_exit+0x0/0x40 Instruction dump: e93c0018 e9690010 e80b0068 7fff0214 4bffff94 7c0802a6 fbc1fff0 ebc2abe8 7c6b1b78 f8010010 f821ff81 60000000 <80030030> 7809f7e3 e93e8000 41820024 It happens after the boot, during the first login-over-ssh. This is with most of the rest of the -mm poopile applied. i386 and x86_64 seem OK. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev