This patch series consists of some minor cleanups that eventually allow us to implement a dynamic assignment of the gianfar TBIPA. This was the implementation that Andy and Scott indicated was the most desireable solution at the bottom of this discussion:
http://patchwork.ozlabs.org/linuxppc-embedded/patch?id=12902 The lead up patches are as follows: -dont allocate a phydev for the "ghost" phy that seems to appear on ID 0x1f of all the MDIO bus scans. -add in the missing assignment to priv->mii_bus when we assign a phy to the device. -cleanup of unnecessary externs that the above change allows us. -make the mii_bus->priv point to struct gianfar_mdio_data At this point, we can then actually use the phy_map of the mii_bus to tell us which MDIO ID we can use for the TBIPA, instead of just hard coding 0x1f. Paul. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev