On Thu, 2020-02-27 at 19:22 +1100, Andrew Donnellan wrote: > On 21/2/20 2:27 pm, Alastair D'Silva wrote: > > From: Alastair D'Silva <alast...@d-silva.org> > > > > This patch requests the metadata required to issue admin commands, > > as well > > as some helper functions to construct and check the completion of > > the > > commands. > > > > Signed-off-by: Alastair D'Silva <alast...@d-silva.org> > > --- > > arch/powerpc/platforms/powernv/pmem/ocxl.c | 65 ++++++++ > > .../platforms/powernv/pmem/ocxl_internal.c | 153 > > ++++++++++++++++++ > > .../platforms/powernv/pmem/ocxl_internal.h | 61 +++++++ > > 3 files changed, 279 insertions(+) > > > > diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl.c > > b/arch/powerpc/platforms/powernv/pmem/ocxl.c > > index 431212c9f0cc..4e782d22605b 100644 > > --- a/arch/powerpc/platforms/powernv/pmem/ocxl.c > > +++ b/arch/powerpc/platforms/powernv/pmem/ocxl.c > > @@ -216,6 +216,58 @@ static int register_lpc_mem(struct ocxlpmem > > *ocxlpmem) > > return 0; > > } > > > > +/** > > + * extract_command_metadata() - Extract command data from MMIO & > > save it for further use > > + * @ocxlpmem: the device metadata > > + * @offset: The base address of the command data structures > > (address of CREQO) > > + * @command_metadata: A pointer to the command metadata to > > populate > > + * Return: 0 on success, negative on failure > > + */ > > +static int extract_command_metadata(struct ocxlpmem *ocxlpmem, u32 > > offset, > > + struct command_metadata > > *command_metadata) > > +{ > > + int rc; > > + u64 tmp; > > + > > + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu, offset, > > OCXL_LITTLE_ENDIAN, > > + &tmp); > > + if (rc) > > + return rc; > > + > > + command_metadata->request_offset = tmp >> 32; > > + command_metadata->response_offset = tmp & 0xFFFFFFFF; > > + > > + rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu, offset + 8, > > OCXL_LITTLE_ENDIAN, > > + &tmp); > > + if (rc) > > + return rc; > > + > > + command_metadata->data_offset = tmp >> 32; > > + command_metadata->data_size = tmp & 0xFFFFFFFF; > > + > > + command_metadata->id = 0; > > + > > + return 0; > > +} > > + > > +/** > > + * setup_command_metadata() - Set up the command metadata > > + * @ocxlpmem: the device metadata > > + */ > > +static int setup_command_metadata(struct ocxlpmem *ocxlpmem) > > +{ > > + int rc; > > + > > + mutex_init(&ocxlpmem->admin_command.lock); > > + > > + rc = extract_command_metadata(ocxlpmem, GLOBAL_MMIO_ACMA_CREQO, > > + &ocxlpmem->admin_command); > > + if (rc) > > + return rc; > > + > > + return 0; > > +} > > + > > /** > > * is_usable() - Is a controller usable? > > * @ocxlpmem: the device metadata > > @@ -456,6 +508,14 @@ static int probe(struct pci_dev *pdev, const > > struct pci_device_id *ent) > > } > > ocxlpmem->pdev = pdev; > > > > + ocxlpmem->timeouts[ADMIN_COMMAND_ERRLOG] = 2000; // ms > > + ocxlpmem->timeouts[ADMIN_COMMAND_HEARTBEAT] = 100; // ms > > + ocxlpmem->timeouts[ADMIN_COMMAND_SMART] = 100; // ms > > + ocxlpmem->timeouts[ADMIN_COMMAND_CONTROLLER_DUMP] = 1000; // ms > > + ocxlpmem->timeouts[ADMIN_COMMAND_CONTROLLER_STATS] = 100; // ms > > + ocxlpmem->timeouts[ADMIN_COMMAND_SHUTDOWN] = 1000; // ms > > + ocxlpmem->timeouts[ADMIN_COMMAND_FW_UPDATE] = 16000; // ms > > Why are we keeping these timeouts in a per device struct? I can't > see > anywhere where we change these values. >
These are overwritten in a later patch, which I've missed! thanks for pointing this out. These initial values will be overwritten by card specific timeouts. > > + > > pci_set_drvdata(pdev, ocxlpmem); > > > > ocxlpmem->ocxl_fn = ocxl_function_open(pdev); > > @@ -501,6 +561,11 @@ static int probe(struct pci_dev *pdev, const > > struct pci_device_id *ent) > > goto err; > > } > > > > + if (setup_command_metadata(ocxlpmem)) { > > + dev_err(&pdev->dev, "Could not read OCXL command > > matada\n"); > > metadata Wow, not sure how that happened. > > Also, "OCXL command metadata" is misleading, this is a pmem specific > thing, not an OpenCAPI thing, I would prefer just "command metadata". > Ok > > + goto err; > > + } > > + > > elapsed = 0; > > timeout = ocxlpmem->readiness_timeout + ocxlpmem- > > >memory_available_timeout; > > while (!is_usable(ocxlpmem, false)) { > > diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.c > > b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.c > > index 617ca943b1b8..583f48023025 100644 > > --- a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.c > > +++ b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.c > > @@ -17,3 +17,156 @@ int ocxlpmem_chi(const struct ocxlpmem > > *ocxlpmem, u64 *chi) > > > > return 0; > > } > > + > > +#define COMMAND_REQUEST_SIZE (8 * sizeof(u64)) > > +static int scm_command_request(const struct ocxlpmem *ocxlpmem, > > + struct command_metadata *cmd, u8 > > op_code) > > +{ > > + u64 val = op_code; > > + int rc; > > + u8 i; > > + > > + cmd->op_code = op_code; > > + cmd->id++; > > + > > + val |= ((u64)cmd->id) << 16; > > + > > + rc = ocxl_global_mmio_write64(ocxlpmem->ocxl_afu, cmd- > > >request_offset, > > + OCXL_LITTLE_ENDIAN, val); > > + if (rc) > > + return rc; > > + > > + for (i = sizeof(u64); i < COMMAND_REQUEST_SIZE; i += > > sizeof(u64)) { > > + rc = ocxl_global_mmio_write64(ocxlpmem->ocxl_afu, > > + cmd->request_offset + i, > > + OCXL_LITTLE_ENDIAN, 0); > > + if (rc) > > + return rc; > > + } > > + > > + return 0; > > +} > > + > > +int admin_command_request(struct ocxlpmem *ocxlpmem, u8 op_code) > > +{ > > + u64 val; > > + int rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu, > > GLOBAL_MMIO_CHI, > > + OCXL_LITTLE_ENDIAN, &val); > > + if (rc) > > + return rc; > > Ignoring the value here expected, you're just trying to verify that > you > don't see an error on the read? > This was some vestigial code that should be removed. > > + > > + return scm_command_request(ocxlpmem, &ocxlpmem->admin_command, > > op_code); > > +} > > + > > +static int command_response(const struct ocxlpmem *ocxlpmem, > > + const struct command_metadata *cmd) > > +{ > > + u64 val; > > + u16 id; > > + u8 status; > > + int rc = ocxl_global_mmio_read64(ocxlpmem->ocxl_afu, > > + cmd->response_offset, > > + OCXL_LITTLE_ENDIAN, &val); > > + if (rc) > > + return rc; > > + > > + status = val & 0xff; > > + id = (val >> 16) & 0xffff; > > + > > + if (id != cmd->id) { > > + dev_warn(&ocxlpmem->dev, > > + "Expected response for command %d, but > > received response for command %d instead.\n", > > + cmd->id, id); > > If this happens I imagine something's gone pretty wrong - this > should > probably be a dev_err()? And perhaps we want to make sure we return > an > error code rather than whatever status code we get from the MMIO? > Ok > > + } > > + > > + return status; > > +} > > + > > +int admin_response(const struct ocxlpmem *ocxlpmem) > > +{ > > + return command_response(ocxlpmem, &ocxlpmem->admin_command); > > +} > > + > > + > > +int admin_command_execute(const struct ocxlpmem *ocxlpmem) > > +{ > > + return ocxl_global_mmio_set64(ocxlpmem->ocxl_afu, > > GLOBAL_MMIO_HCI, > > + OCXL_LITTLE_ENDIAN, > > GLOBAL_MMIO_HCI_ACRW); > > +} > > + > > +static bool admin_command_complete(const struct ocxlpmem > > *ocxlpmem) > > +{ > > + u64 val = 0; > > + > > + int rc = ocxlpmem_chi(ocxlpmem, &val); > > + > > + WARN_ON(rc); > > + > > + return (val & GLOBAL_MMIO_CHI_ACRA) != 0; > > +} > > + > > +int admin_command_complete_timeout(const struct ocxlpmem > > *ocxlpmem, > > + int command) > > +{ > > + u32 timeout = ocxlpmem->timeouts[command]; > > + // 32 is the next power of 2 greater than the 20ms minimum for > > msleep > > +#define TIMEOUT_SLEEP_MILLIS 32 > > + timeout /= TIMEOUT_SLEEP_MILLIS; > > + if (!timeout) > > + timeout = DEFAULT_TIMEOUT / TIMEOUT_SLEEP_MILLIS; > > + > > + while (timeout-- > 0) { > > + if (admin_command_complete(ocxlpmem)) > > + return 0; > > + msleep(TIMEOUT_SLEEP_MILLIS); > > + } > > I think the more traditional way to implement timeouts is something > more > like: > > unsigned long timeout = jiffies + msecs_to_jiffies(<timeout > period>); > do { > <check> > <sleep> > } while (time_before(jiffies, timeout)); > ok > > + > > + if (admin_command_complete(ocxlpmem)) > > + return 0; > > + > > + return -EBUSY; > > +} > > + > > +int admin_response_handled(const struct ocxlpmem *ocxlpmem) > > +{ > > + return ocxl_global_mmio_set64(ocxlpmem->ocxl_afu, > > GLOBAL_MMIO_CHIC, > > + OCXL_LITTLE_ENDIAN, > > GLOBAL_MMIO_CHI_ACRA); > > +} > > This looks wrong? My reading of the spec is that you're meant to > *clear* > ACRA upon completion of handing, this looks like it's setting ACRA to > 1. > Writing a 1 to the CHIC register clears the respective bit in the CHI register. I'll add a comment. > > + > > +void warn_status(const struct ocxlpmem *ocxlpmem, const char > > *message, > > + u8 status) > > +{ > > + const char *text = "Unknown"; > > + > > + switch (status) { > > + case STATUS_SUCCESS: > > + text = "Success"; > > + break; > > + > > + case STATUS_MEM_UNAVAILABLE: > > + text = "Persistent memory unavailable"; > > + break; > > + > > + case STATUS_BAD_OPCODE: > > + text = "Bad opcode"; > > + break; > > + > > + case STATUS_BAD_REQUEST_PARM: > > + text = "Bad request parameter"; > > + break; > > + > > + case STATUS_BAD_DATA_PARM: > > + text = "Bad data parameter"; > > + break; > > + > > + case STATUS_DEBUG_BLOCKED: > > + text = "Debug action blocked"; > > + break; > > + > > + case STATUS_FAIL: > > + text = "Failed"; > > + break; > > + } > > + > > + dev_warn(&ocxlpmem->dev, "%s: %s (%x)\n", message, text, > > status); > > +} > > diff --git a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h > > b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h > > index ba0301533d00..2fef68c71271 100644 > > --- a/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h > > +++ b/arch/powerpc/platforms/powernv/pmem/ocxl_internal.h > > @@ -7,6 +7,7 @@ > > #include <linux/mm.h> > > > > #define LABEL_AREA_SIZE (1UL << PA_SECTION_SHIFT) > > +#define DEFAULT_TIMEOUT 100 > > > > #define GLOBAL_MMIO_CHI 0x000 > > #define GLOBAL_MMIO_CHIC 0x008 > > @@ -80,6 +81,16 @@ > > #define STATUS_FW_ARG_INVALID 0x51 > > #define STATUS_FW_INVALID 0x52 > > > > +struct command_metadata { > > + u32 request_offset; > > + u32 response_offset; > > + u32 data_offset; > > + u32 data_size; > > + struct mutex lock; > > + u16 id; > > + u8 op_code; > > +}; > > + > > struct ocxlpmem_function0 { > > struct pci_dev *pdev; > > struct ocxl_fn *ocxl_fn; > > @@ -95,9 +106,11 @@ struct ocxlpmem { > > struct ocxl_afu *ocxl_afu; > > struct ocxl_context *ocxl_context; > > void *metadata_addr; > > + struct command_metadata admin_command; > > struct resource pmem_res; > > struct nd_region *nd_region; > > char fw_version[8+1]; > > + u32 timeouts[ADMIN_COMMAND_MAX+1]; > > > > u32 max_controller_dump_size; > > u16 scm_revision; // major/minor > > @@ -122,3 +135,51 @@ struct ocxlpmem { > > * Returns 0 on success, negative on error > > */ > > int ocxlpmem_chi(const struct ocxlpmem *ocxlpmem, u64 *chi); > > + > > +/** > > + * admin_command_request() - Issue an admin command request > > + * @ocxlpmem: the device metadata > > + * @op_code: The op-code for the command > > + * > > + * Returns an identifier for the command, or negative on error > > + */ > > +int admin_command_request(struct ocxlpmem *ocxlpmem, u8 op_code); > > + > > +/** > > + * admin_response() - Validate an admin response > > + * @ocxlpmem: the device metadata > > + * Returns the status code of the command, or negative on error > > + */ > > +int admin_response(const struct ocxlpmem *ocxlpmem); > > + > > +/** > > + * admin_command_execute() - Notify the controller to start > > processing a pending admin command > > + * @ocxlpmem: the device metadata > > + * Returns 0 on success, negative on error > > + */ > > +int admin_command_execute(const struct ocxlpmem *ocxlpmem); > > + > > +/** > > + * admin_command_complete_timeout() - Wait for an admin command to > > finish executing > > + * @ocxlpmem: the device metadata > > + * @command: the admin command to wait for completion (determines > > the timeout) > > + * Returns 0 on success, -EBUSY on timeout > > + */ > > +int admin_command_complete_timeout(const struct ocxlpmem > > *ocxlpmem, > > + int command); > > + > > +/** > > + * admin_response_handled() - Notify the controller that the admin > > response has been handled > > + * @ocxlpmem: the device metadata > > + * Returns 0 on success, negative on failure > > + */ > > +int admin_response_handled(const struct ocxlpmem *ocxlpmem); > > + > > +/** > > + * warn_status() - Emit a kernel warning showing a command status. > > + * @ocxlpmem: the device metadata > > + * @message: A message to accompany the warning > > + * @status: The command status > > + */ > > +void warn_status(const struct ocxlpmem *ocxlpmem, const char > > *message, > > + u8 status); > > -- Alastair D'Silva Open Source Developer Linux Technology Centre, IBM Australia mob: 0423 762 819