> Doesn't look like you are passing a kernel parameters line. The > kernel probably is booting, but doesn't know where to output the > console. Try adding "console=ttyPSC0,115200".
Hi Grant, I've tried to add that with this commands => bootargs debug console=ttyPSC0,115200 root=/dev/ram => saveenv but the result is not so different. It still stops after printing these lines >Linux/PowerPC load: debug console=ttyPSC0,115200 root=/dev/ram >Finalizing device tree... flat tree at 0x75e300 What should I see after that, in case of successful boot? Thanks for your help. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
