On Tue, Jun 10, 2008 at 11:15:08AM -0500, Kumar Gala wrote: > > On May 19, 2008, at 12:47 PM, Anton Vorontsov wrote: > >> This is needed to access QE GPIOs via Linux GPIO API. >> >> Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]> >> Acked-By: Timur Tabi <[EMAIL PROTECTED]> >> --- >> Documentation/powerpc/booting-without-of.txt | 27 +++++ >> arch/powerpc/sysdev/qe_lib/Kconfig | 9 ++ >> arch/powerpc/sysdev/qe_lib/Makefile | 1 + >> arch/powerpc/sysdev/qe_lib/gpio.c | 146 +++++++++++++++++ >> +++++++++ >> include/asm-powerpc/qe.h | 3 + >> 5 files changed, 186 insertions(+), 0 deletions(-) >> create mode 100644 arch/powerpc/sysdev/qe_lib/gpio.c > > applied.
I've just rebased on the pushed out powerpc-next branch, and noticed that you merged this patch from the old series. The difference is in absence of arch_initcall() for QE GPIOs initialization, i.e. in this version boards should explicitly call qe_add_gpiochips(). So.. was this done deliberately? Or should I send you an update? -- Anton Vorontsov email: [EMAIL PROTECTED] irc://irc.freenode.net/bd2 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev