Thank you for the help (again). I've got my driver registering the isr on it's
own now. In the
end the problem was the dts and also not using irq_of_parse_and_map.
Ron
--- Scott Wood <[EMAIL PROTECTED]> wrote:
> Ron Madrid wrote:
> > I don't see a "dma" node in the mpc8377mds.dts (2.6.25). I found one in
> > mpc8610_hpcd.dts and
> > modeled it after that.
>
> Try head-of-tree.
>
> > [EMAIL PROTECTED] {
> > #address-cells = <1>;
> > #size-cells = <1>;
> > compatible = "fsl,elo-dma";
> > cell-index = <0>;
> > reg = <0x82a8 0x4>; /* DMA general status register */
> > ranges = <0x0 0x8100 0x200>;
>
> Should also put the interrupts in the dma node itself, so that the
> driver can register it once and use the shared status register (but
> don't remove it from the individual channels).
>
> -Scott
>
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
