[PATCH 2/2] powerpc/32: Set an IBAT covering up to _einittext during init

[Christophe Leroy]

Always set an IBAT covering up to _einittext during init because when
CONFIG_MODULES is not selected there is no reason to have an exception
handler for kernel instruction TLB misses.

It implies DBAT and IBAT are now totaly independent, IBATs are set
by setibat() and DBAT by setbat().

This allows to revert commit 9bb162fa26ed ("powerpc/603: Fix
boot failure with DEBUG_PAGEALLOC and KFENCE")

Reported-by: Maxime Bizon <mbi...@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.le...@csgroup.eu>
---
 arch/powerpc/kernel/head_book3s_32.S |  4 ++--
 arch/powerpc/mm/book3s32/mmu.c       | 10 ++++------
 2 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kernel/head_book3s_32.S 
b/arch/powerpc/kernel/head_book3s_32.S
index 6c739beb938c..519b60695167 100644
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -418,14 +418,14 @@ InstructionTLBMiss:
  */
        /* Get PTE (linux-style) and check access */
        mfspr   r3,SPRN_IMISS
-#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) || 
defined(CONFIG_KFENCE)
+#ifdef CONFIG_MODULES
        lis     r1, TASK_SIZE@h         /* check if kernel address */
        cmplw   0,r1,r3
 #endif
        mfspr   r2, SPRN_SDR1
        li      r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC | _PAGE_USER
        rlwinm  r2, r2, 28, 0xfffff000
-#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) || 
defined(CONFIG_KFENCE)
+#ifdef CONFIG_MODULES
        bgt-    112f
        lis     r2, (swapper_pg_dir - PAGE_OFFSET)@ha   /* if kernel address, 
use */
        li      r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c
index 49a737fbbd18..40029280c320 100644
--- a/arch/powerpc/mm/book3s32/mmu.c
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -159,7 +159,10 @@ unsigned long __init mmu_mapin_ram(unsigned long base, 
unsigned long top)
 {
        unsigned long done;
        unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET;
+       unsigned long size;
 
+       size = roundup_pow_of_two((unsigned long)_einittext - PAGE_OFFSET);
+       setibat(0, PAGE_OFFSET, 0, size, PAGE_KERNEL_X);
 
        if (debug_pagealloc_enabled_or_kfence() || __map_without_bats) {
                pr_debug_once("Read-Write memory mapped without BATs\n");
@@ -245,10 +248,9 @@ void mmu_mark_rodata_ro(void)
 }
 
 /*
- * Set up one of the I/D BAT (block address translation) register pairs.
+ * Set up one of the D BAT (block address translation) register pairs.
  * The parameters are not checked; in particular size must be a power
  * of 2 between 128k and 256M.
- * On 603+, only set IBAT when _PAGE_EXEC is set
  */
 void __init setbat(int index, unsigned long virt, phys_addr_t phys,
                   unsigned int size, pgprot_t prot)
@@ -284,10 +286,6 @@ void __init setbat(int index, unsigned long virt, 
phys_addr_t phys,
                /* G bit must be zero in IBATs */
                flags &= ~_PAGE_EXEC;
        }
-       if (flags & _PAGE_EXEC)
-               bat[0] = bat[1];
-       else
-               bat[0].batu = bat[0].batl = 0;
 
        bat_addrs[index].start = virt;
        bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1;
-- 
2.36.1