This is second version of my fix to PPC's "WARNING: suspicious RCU usage", I improved my fix under Paul E. McKenney's guidance: Link: https://lore.kernel.org/lkml/20220914021528.15946-1-zhouzho...@gmail.com/T/
During the cpu offlining, the sub functions of xive_teardown_cpu will call __lock_acquire when CONFIG_LOCKDEP=y. The latter function will travel RCU protected list, so "WARNING: suspicious RCU usage" will be triggered. Avoid lockdep when we are offline. Signed-off-by: Zhouyi Zhou <zhouzho...@gmail.com> --- Dear PPC and RCU developers I found this bug when trying to do rcutorture tests in ppc VM of Open Source Lab of Oregon State University console.log report following bug: [ 37.635545][ T0] WARNING: suspicious RCU usage^M [ 37.636409][ T0] 6.0.0-rc4-next-20220907-dirty #8 Not tainted^M [ 37.637575][ T0] -----------------------------^M [ 37.638306][ T0] kernel/locking/lockdep.c:3723 RCU-list traversed in non-reader section!!^M [ 37.639651][ T0] ^M [ 37.639651][ T0] other info that might help us debug this:^M [ 37.639651][ T0] ^M [ 37.641381][ T0] ^M [ 37.641381][ T0] RCU used illegally from offline CPU!^M [ 37.641381][ T0] rcu_scheduler_active = 2, debug_locks = 1^M [ 37.667170][ T0] no locks held by swapper/6/0.^M [ 37.668328][ T0] ^M [ 37.668328][ T0] stack backtrace:^M [ 37.669995][ T0] CPU: 6 PID: 0 Comm: swapper/6 Not tainted 6.0.0-rc4-next-20220907-dirty #8^M [ 37.672777][ T0] Call Trace:^M [ 37.673729][ T0] [c000000004653920] [c00000000097f9b4] dump_stack_lvl+0x98/0xe0 (unreliable)^M [ 37.678579][ T0] [c000000004653960] [c0000000001f2eb8] lockdep_rcu_suspicious+0x148/0x16c^M [ 37.680425][ T0] [c0000000046539f0] [c0000000001ed9b4] __lock_acquire+0x10f4/0x26e0^M [ 37.682450][ T0] [c000000004653b30] [c0000000001efc2c] lock_acquire+0x12c/0x420^M [ 37.684113][ T0] [c000000004653c20] [c0000000010d704c] _raw_spin_lock_irqsave+0x6c/0xc0^M [ 37.686154][ T0] [c000000004653c60] [c0000000000c7b4c] xive_spapr_put_ipi+0xcc/0x150^M [ 37.687879][ T0] [c000000004653ca0] [c0000000010c72a8] xive_cleanup_cpu_ipi+0xc8/0xf0^M [ 37.689856][ T0] [c000000004653cf0] [c0000000010c7370] xive_teardown_cpu+0xa0/0xf0^M [ 37.691877][ T0] [c000000004653d30] [c0000000000fba5c] pseries_cpu_offline_self+0x5c/0x100^M [ 37.693882][ T0] [c000000004653da0] [c00000000005d2c4] arch_cpu_idle_dead+0x44/0x60^M [ 37.695739][ T0] [c000000004653dc0] [c0000000001c740c] do_idle+0x16c/0x3d0^M [ 37.697536][ T0] [c000000004653e70] [c0000000001c7a1c] cpu_startup_entry+0x3c/0x40^M [ 37.699694][ T0] [c000000004653ea0] [c00000000005ca20] start_secondary+0x6c0/0xb50^M [ 37.701742][ T0] [c000000004653f90] [c00000000000d054] start_secondary_prolog+0x10/0x14^M Tested on PPC VM of Open Source Lab of Oregon State University. Test results show that although "WARNING: suspicious RCU usage" has gone, and there are less "BUG: soft lockup" reports than the original kernel (9 vs 13), which sounds good ;-) But after my modification, results-rcutorture-kasan/SRCU-P/console.log.diags shows a new warning: [ 222.289242][ T110] WARNING: CPU: 6 PID: 110 at kernel/rcu/rcutorture.c:2806 rcu_torture_fwd_prog+0xc88/0xdd0 I guess above new warning also exits in original kernel, so I write a tiny test script as follows: #!/bin/sh COUNTER=0 while [ $COUNTER -lt 1000 ] ; do qemu-system-ppc64 -nographic -smp cores=8,threads=1 -net none -M pseries -nodefaults -device spapr-vscsi -serial file:/tmp/console.log -m 2G -kernel /tmp/vmlinux -append "debug_boot_weak_hash panic=-1 console=ttyS0 rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000 rcutorture.torture_type=srcud rcupdate.rcu_self_test=1 rcutorture.fwd_progress=3 srcutree.big_cpu_lim=5 rcutorture.onoff_interval=1000 rcutorture.onoff_holdoff=30 rcutorture.n_barrier_cbs=4 rcutorture.stat_interval=15 rcutorture.shutdown_secs=420 rcutorture.test_no_idle_hz=1 rcutorture.verbose=1"& qemu_pid=$! cd ~/next1/linux-next make clean #I use "make vmlinux -j 8" to create heavy background jitter make vmlinux -j 8 > /dev/null 2>&1 make_pid=$! wait $qemu_pid kill $qemu_pid kill $make_id if grep -q WARN /tmp/console.log; then echo $COUNTER > /tmp/counter exit fi COUNTER=$(($COUNTER+1)) done Above test shows that original kernel also warn about "WARNING: CPU: 6 PID: 110 at kernel/rcu/rcutorture.c:2806 rcu_torture_fwd_prog+0xc88/0xdd0" But I am not very sure about my results, so I still add a [RFC] to my subject line. Thank all of you for your guidance and encouragement ;-) Cheers Zhouyi -- arch/powerpc/platforms/pseries/hotplug-cpu.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index e0a7ac5db15d..e47098f00da1 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -64,10 +64,15 @@ static void pseries_cpu_offline_self(void) local_irq_disable(); idle_task_exit(); + /* prevent lockdep code from traveling RCU protected list + * when we are offline. + */ + lockdep_off(); if (xive_enabled()) xive_teardown_cpu(); else xics_teardown_cpu(); + lockdep_on(); unregister_slb_shadow(hwcpu); rtas_stop_self(); -- 2.25.1