On Sat, Jul 12, 2008 at 11:36 AM, Mark Brown <[EMAIL PROTECTED]> wrote: > The power configuration should be fixed, though. Normally drivers > either fully implement DAPM (including set_bias_level()) or power > everything in the codec up when the driver is loaded. At the minute > what the driver is doing appears to be powering the codec up in both > _hw_params() and _probe() but never powering anything down - if that is > the case then probably all you need to do is remove the extra power up > from hw_params(), giving you the simple option.
Okay, cool. I'll do this for the time being then. Thanks, g. -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
