Stefan Berger <stef...@linux.ibm.com> writes: > On 2/23/23 22:25, Michael Ellerman wrote: >> The TPM code in prom_init.c creates a small buffer of memory to store >> the TPM's SML (Stored Measurement Log). It's communicated to Linux via >> the linux,sml-base/size device tree properties of the TPM node. >> >> When kexec'ing that buffer can be overwritten, or when kdump'ing it may >> not be mapped by the second kernel. The latter can lead to a crash when >> booting the second kernel such as: >> >> tpm_ibmvtpm 71000003: CRQ initialization completed >> BUG: Unable to handle kernel data access on read at 0xc00000002ffb0000 >> Faulting instruction address: 0xc0000000200a70e0 >> Oops: Kernel access of bad area, sig: 11 [#1] >> LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries >> Modules linked in: >> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc2-00134-g9307ce092f5d >> #314 >> Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 >> 0xf000005 of:SLOF,git-5b4c5a pSeries >> NIP: c0000000200a70e0 LR: c0000000203dd5dc CTR: 0000000000000800 >> REGS: c000000024543280 TRAP: 0300 Not tainted >> (6.2.0-rc2-00134-g9307ce092f5d) >> MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 24002280 XER: >> 00000006 >> CFAR: c0000000200a70c8 DAR: c00000002ffb0000 DSISR: 40000000 IRQMASK: 0 >> ... >> NIP memcpy_power7+0x400/0x7d0 >> LR kmemdup+0x5c/0x80 >> Call Trace: >> memcpy_power7+0x274/0x7d0 (unreliable) >> kmemdup+0x5c/0x80 >> tpm_read_log_of+0xe8/0x1b0 >> tpm_bios_log_setup+0x60/0x210 >> tpm_chip_register+0x134/0x320 >> tpm_ibmvtpm_probe+0x520/0x7d0 >> vio_bus_probe+0x9c/0x460 >> really_probe+0x104/0x420 >> __driver_probe_device+0xb0/0x170 >> driver_probe_device+0x58/0x180 >> __driver_attach+0xd8/0x250 >> bus_for_each_dev+0xb4/0x140 >> driver_attach+0x34/0x50 >> bus_add_driver+0x1e8/0x2d0 >> driver_register+0xb4/0x1c0 >> __vio_register_driver+0x74/0x9c >> ibmvtpm_module_init+0x34/0x48 >> do_one_initcall+0x80/0x320 >> kernel_init_freeable+0x304/0x3ac >> kernel_init+0x30/0x1a0 >> ret_from_kernel_thread+0x5c/0x64 > > I have not been able to reproduce this particular crash issue with a > 6.2 kernel running on P10 PowerVM when NOT applying your patches.
The crash only happens for a crashdump kernel, not a regular kexec. And depending on where the SML is in memory, compared to where the crashkernel is, the SML might be mapped accidentally in which case there is no crash. > For my tests I have used the following parameter with the 16GB VM: > crashkernel=2G-4G:384M,4G-16G:1G,16G-64G:2G,64G-128G:2G,128G-:4G So you should be seeing a 2GB crashkernel reservation at 512MB. > What I noticed is that the log gets corrupted when the 2 patches are applied: > > After fresh boot: > >> cp /sys/kernel/security/tpm0/binary_bios_measurements ./ >> ls -l binary_bios_measurements > -r--r-----. 1 root root 10051 Feb 28 12:09 binary_bios_measurements > > >> kexec -l /boot/vmlinuz-6.2.0+ --initrd /boot/initramfs-6.2.0+.img >> '--append=BOOT_IMAGE=/vmlinuz-6.2.0+ root=/dev/mapper/rhel_XYZ ro >> crashkernel=2G-4G:384M,4G-16G:1G,16G-64G:2G,64G-128G:2G,128G-:4G >> rd.lvm.lv=rhel_XYZ/root rd.lvm.lv=rhel_XYZ/swap biosdevname=0' -s >> kexec -e That's a normal kexec, not a crash kexec, so it doesn't use the crashkernel region mentioned above. >> cp /sys/kernel/security/tpm0/binary_bios_measurements ./ >> ls -l binary_bios_measurements > -r--r-----. 1 root root 32 Feb 28 12:10 binary_bios_measurements > >> od -t x1 < binary_bios_measurements > 0000000 d0 0d fe ed 00 00 77 80 00 00 00 a0 00 00 4f 4c > 0000020 00 00 00 28 00 00 00 11 00 00 00 11 00 00 00 00 > 0000040 That's a device tree header !? O_o #define OF_DT_HEADER 0xd00dfeed /* marker */ > The contents have changed and these first 4 bytes of it are always the > same once it has become this 32 byte file, otherwise they would be > zero. I'm not sure what's happening there. We'll need to debug it some more :/ cheers