Scan for linux,usable-memory properties in case of dynamic reconfiguration
memory . Support for kexec/kdump.
Signed-off-by: Chandru Siddalingappa <[EMAIL PROTECTED]>
---
Patch applies on powerpc tree. Patch was reviewed by Nathan Fontenot, Stephen
Rothwell, Michael Neuling.
arch/powerpc/kernel/prom.c | 40 +++++++++++++++++++++++------
arch/powerpc/mm/numa.c | 48 ++++++++++++++++++++++++-----------
2 files changed, 65 insertions(+), 23 deletions(-)
diff -Naurp powerpc-orig/arch/powerpc/kernel/prom.c
powerpc/arch/powerpc/kernel/prom.c
--- powerpc-orig/arch/powerpc/kernel/prom.c 2008-07-22 14:11:53.000000000
+0530
+++ powerpc/arch/powerpc/kernel/prom.c 2008-07-22 14:12:17.000000000 +0530
@@ -888,9 +888,10 @@ static u64 __init dt_mem_next_cell(int s
*/
static int __init early_init_dt_scan_drconf_memory(unsigned long node)
{
- cell_t *dm, *ls;
- unsigned long l, n, flags;
+ cell_t *dm, *ls, *usm;
+ unsigned long l, n, flags, ranges;
u64 base, size, lmb_size;
+ char buf[32];
ls = (cell_t *)of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t))
@@ -914,14 +915,37 @@ static int __init early_init_dt_scan_drc
or if the block is not assigned to this partition (0x8) */
if ((flags & 0x80) || !(flags & 0x8))
continue;
- size = lmb_size;
- if (iommu_is_off) {
+ if (iommu_is_off)
if (base >= 0x80000000ul)
continue;
- if ((base + size) > 0x80000000ul)
- size = 0x80000000ul - base;
- }
- lmb_add(base, size);
+ size = lmb_size;
+
+ /*
+ * Append 'n' to 'linux,usable-memory' to get special
+ * properties passed in by tools like kexec-tools. Relevant
+ * only if this is a kexec/kdump kernel.
+ */
+ sprintf(buf, "linux,usable-memory%d", (int)n);
+ usm = of_get_flat_dt_prop(node, buf, &l);
+ ranges = 1;
+ if (usm != NULL)
+ ranges = (l >> 2)/(dt_root_addr_cells
+ + dt_root_size_cells);
+ do {
+ if (usm != NULL) {
+ base = dt_mem_next_cell(dt_root_addr_cells,
+ &usm);
+ size = dt_mem_next_cell(dt_root_size_cells,
+ &usm);
+ if (size == 0)
+ break;
+ }
+ if (iommu_is_off)
+ if ((base + size) > 0x80000000ul)
+ size = 0x80000000ul - base;
+
+ lmb_add(base, size);
+ } while (--ranges);
}
lmb_dump_all();
return 0;
diff -Naurp powerpc-orig/arch/powerpc/mm/numa.c powerpc/arch/powerpc/mm/numa.c
--- powerpc-orig/arch/powerpc/mm/numa.c 2008-07-22 14:11:53.000000000 +0530
+++ powerpc/arch/powerpc/mm/numa.c 2008-07-22 14:12:17.000000000 +0530
@@ -493,11 +493,13 @@ static unsigned long __init numa_enforce
*/
static void __init parse_drconf_memory(struct device_node *memory)
{
- const u32 *dm;
- unsigned int n, rc;
- unsigned long lmb_size, size;
+ const u32 *dm, *usm;
+ unsigned int n, rc, len, ranges;
+ unsigned long lmb_size, size, sz;
int nid;
struct assoc_arrays aa;
+ char buf[32];
+ u64 base;
n = of_get_drconf_memory(memory, &dm);
if (!n)
@@ -524,19 +526,35 @@ static void __init parse_drconf_memory(s
nid = of_drconf_to_nid_single(&drmem, &aa);
- fake_numa_create_new_node(
- ((drmem.base_addr + lmb_size) >> PAGE_SHIFT),
- &nid);
-
- node_set_online(nid);
-
- size = numa_enforce_memory_limit(drmem.base_addr, lmb_size);
- if (!size)
- continue;
+ /*
+ * Append 'n' to 'linux,usable-memory' to get special
+ * properties passed in by tools like kexec-tools. Relevant
+ * only if this is a kexec/kdump kernel.
+ */
+ sprintf(buf, "linux,usable-memory%d", (int)n);
+ usm = of_get_property(memory, buf, &len);
+ ranges = 1;
+ if (usm != NULL)
+ ranges = (len >> 2) /
+ (n_mem_addr_cells + n_mem_size_cells);
+
+ base = drmem.base_addr;
+ size = lmb_size;
+ do {
+ if (usm != NULL) {
+ base = read_n_cells(n_mem_addr_cells, &usm);
+ size = read_n_cells(n_mem_size_cells, &usm);
+ }
- add_active_range(nid, drmem.base_addr >> PAGE_SHIFT,
- (drmem.base_addr >> PAGE_SHIFT)
- + (size >> PAGE_SHIFT));
+ fake_numa_create_new_node(((base + size) >> PAGE_SHIFT),
+ &nid);
+ node_set_online(nid);
+ sz = numa_enforce_memory_limit(base, size);
+ if (sz)
+ add_active_range(nid, base >> PAGE_SHIFT,
+ (base >> PAGE_SHIFT)
+ + (sz >> PAGE_SHIFT));
+ } while (--ranges);
}
}
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
