On Wed, Sep 13, 2023 at 09:26:40AM +0200, Herve Codina wrote:
> Hi Conor,
> 
> On Tue, 12 Sep 2023 18:21:58 +0100
> Conor Dooley <co...@kernel.org> wrote:
> 
> > On Tue, Sep 12, 2023 at 12:10:18PM +0200, Herve Codina wrote:
> > > The QMC (QUICC mutichannel controller) is a controller present in some
> > > PowerQUICC SoC such as MPC885.
> > > The QMC HDLC uses the QMC controller to transfer HDLC data.
> > > 
> > > Additionally, a framer can be connected to the QMC HDLC.
> > > If present, this framer is the interface between the TDM bus used by the
> > > QMC HDLC and the E1/T1 line.
> > > The QMC HDLC can use this framer to get information about the E1/T1 line
> > > and configure the E1/T1 line.
> > > 
> > > Signed-off-by: Herve Codina <herve.cod...@bootlin.com>
> > > ---
> > >  .../bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml   | 13 +++++++++++++
> > >  1 file changed, 13 insertions(+)
> > > 
> > > diff --git 
> > > a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml 
> > > b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
> > > index 82d9beb48e00..b5073531f3f1 100644
> > > --- 
> > > a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
> > > +++ 
> > > b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
> > > @@ -101,6 +101,16 @@ patternProperties:
> > >            Channel assigned Rx time-slots within the Rx time-slots routed 
> > > by the
> > >            TSA to this cell.
> > >  
> > > +      compatible:
> > > +        const: fsl,qmc-hdlc
> > > +
> > > +      fsl,framer:
> > > +        $ref: /schemas/types.yaml#/definitions/phandle
> > > +        description:
> > > +          phandle to the framer node. The framer is in charge of an 
> > > E1/T1 line
> > > +          interface connected to the TDM bus. It can be used to get the 
> > > E1/T1 line
> > > +          status such as link up/down.  
> > 
> > Sounds like this fsl,framer property should depend on the compatible
> > being present, no?
> 
> Well from the implementation point of view, only the QMC HDLC driver uses this
> property.
> 
> From the hardware description point of view, this property means that the 
> time slots
> handled by this channel are connected to the framer. So I think it makes 
> sense for
> any channel no matter the compatible (even if compatible is not present).
> 
> Should I change and constraint the fsl,framer property to the compatible 
> presence ?
> If so, is the following correct for this contraint ?
>    --- 8< ---
>    dependencies:
>      - fsl,framer: [ compatible ];
>    --- 8< ---

The regular sort of
if:
        compatible:
                contains:
                        const: foo
then:
        required:
                - fsl,framer
would fit the bill, no?

Attachment: signature.asc
Description: PGP signature

Reply via email to