Hello All, I am trying to boot the mpc8349-mITX board with Compact flash support, and am unable to boot the Linux kernel. Here is the pertinant versioning information: DTC 1.2.0-rc2-g17773b0e U-Boot 1.3.4-rc1-00012-g1953d12 Linux-2.6.26-05752-g93ded9b
I've built the DTB using the following two commands - neither change the error I get during boot-up. $ ../dtc/dtc -b 0 -I dts -O dtb -R 4 -S 0x3000 -o /tftproot/ssparks/itx/cf2/itx.dtb -V 17 arch/powerpc/boot/dts/mpc8349emitx.dts $ ../dtc/dtc -I dts -O dtb -o /tftproot/ssparks/itx/cf2/itx2.dtb arch/powerpc/boot/dts/mpc8349emitx.dts Can anyone shed any light onto what I am doing to cause the following error? I haven't been able to find this error message in the mailing list or by asking google... ## Booting kernel from Legacy Image at 01001000 ... Image Name: Linux-2.6.26-05752-g93ded9b Created: 2008-07-24 20:40:59 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1708661 Bytes = 1.6 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Flattened Device Tree blob at 01000000 Booting using the fdt blob at 0x1000000 Loading Device Tree to 007fb000, end 007ff526 ... OK WARNING: could not create /chosen FDT_ERR_BADSTRUCTURE. ERROR: /chosen node create failed - must RESET the board to recover. Resetting the board. Thanks for the help, Sam _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev