'pf' and 'lut' is just difference name in difference chips, but basic it is
a MMIO base address plus an offset.
Rename it to avoid duplicate pf_* and lut_* in driver.
Signed-off-by: Frank Li <frank...@nxp.com>
---
Notes:
change from v1 to v3
- new patch at v3
drivers/pci/controller/dwc/pci-layerscape.c | 34 ++++++++++-----------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-layerscape.c
b/drivers/pci/controller/dwc/pci-layerscape.c
index 6f47cfe146c44..4b663b20d8612 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -46,7 +46,7 @@
#define LS_PCIE_DRV_SCFG BIT(0)
struct ls_pcie_drvdata {
- const u32 pf_off;
+ const u32 pf_lut_off;
const struct dw_pcie_host_ops *ops;
int (*exit_from_l2)(struct dw_pcie_rp *pp);
int flags;
@@ -56,13 +56,13 @@ struct ls_pcie_drvdata {
struct ls_pcie {
struct dw_pcie *pci;
const struct ls_pcie_drvdata *drvdata;
- void __iomem *pf_base;
+ void __iomem *pf_lut_base;
struct regmap *scfg;
int index;
bool big_endian;
};
-#define ls_pcie_pf_readl_addr(addr) ls_pcie_pf_readl(pcie, addr)
+#define ls_pcie_pf_lut_readl_addr(addr) ls_pcie_pf_lut_readl(pcie, addr)
#define to_ls_pcie(x) dev_get_drvdata((x)->dev)
static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
@@ -103,20 +103,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie
*pcie)
iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
}
-static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
+static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off)
{
if (pcie->big_endian)
- return ioread32be(pcie->pf_base + off);
+ return ioread32be(pcie->pf_lut_base + off);
- return ioread32(pcie->pf_base + off);
+ return ioread32(pcie->pf_lut_base + off);
}
-static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
+static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
{
if (pcie->big_endian)
- iowrite32be(val, pcie->pf_base + off);
+ iowrite32be(val, pcie->pf_lut_base + off);
else
- iowrite32(val, pcie->pf_base + off);
+ iowrite32(val, pcie->pf_lut_base + off);
}
static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
@@ -126,11 +126,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp
*pp)
u32 val;
int ret;
- val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+ val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
val |= PF_MCR_PTOMR;
- ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+ ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
- ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+ ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
val, !(val & PF_MCR_PTOMR),
PCIE_PME_TO_L2_TIMEOUT_US/10,
PCIE_PME_TO_L2_TIMEOUT_US);
@@ -149,15 +149,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
* Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link
* to exit L2 state.
*/
- val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+ val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
val |= PF_MCR_EXL2S;
- ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+ ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
/*
* L2 exit timeout of 10ms is not defined in the specifications,
* it was chosen based on empirical observations.
*/
- ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+ ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
val, !(val & PF_MCR_EXL2S),
1000,
10000);
@@ -245,7 +245,7 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
};
static const struct ls_pcie_drvdata layerscape_drvdata = {
- .pf_off = 0xc0000,
+ .pf_lut_off = 0xc0000,
.pm_support = true,
.exit_from_l2 = ls_pcie_exit_from_l2,
};
@@ -295,7 +295,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
- pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
+ pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off;
if (pcie->drvdata->flags & LS_PCIE_DRV_SCFG) {
--
2.34.1
