I have no screen that's why I have to use UART. I followed the CPM model in head_32.S : #ifdef CONFIG_PPC_EARLY_DEBUG_CPM setup_cpm_bat: lis r8, 0xf000 ori r8, r8, 0x002a mtspr SPRN_DBAT1L, r8
lis r11, 0xf000 ori r11, r11, (BL_1M << 2) | 2 mtspr SPRN_DBAT1U, r11 blr #endif With this code I can use udbg. According to you, what is the best way ? 2008/8/18, Benjamin Herrenschmidt <[EMAIL PROTECTED]>: > > On Mon, 2008-08-18 at 16:17 +0200, Sébastien Chrétien wrote: > > The mpc7448hpc2 uses a tsi108-bridge. My board uses an IP on a FPGA.. > > I read the code of mpc7448_hpc2.c. > > It uses a ioremap in order to iniatilize the tsi108 registers. But I > > have already initialized MMU with my registers in HEAD_32.S. Do I need > > to use ioremap in setup_arch() ? > > > Why did you hack head_32.S ? You shouldn't do that... This is common > code, not platform code. > > Ben. > > > > > > > > > 2008/8/18, Michael Ellerman <[EMAIL PROTECTED]>: > > On Mon, 2008-08-18 at 13:35 +0200, Sébastien Chrétien wrote: > > > Can somebody explain me the aim of the > > function "setup_arch" in the > > > machine_call structure ? > > > > > > Is this MPC7448 anything like an mpc7448hpc2 ? > > > > If so maybe you should start by looking at the code for it in: > > > > arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c > > > > Even if it's not related, that will give you some idea of what > > the > > callbacks are for. > > > > cheers > > > > -- > > Michael Ellerman > > OzLabs, IBM Australia Development Lab > > > > wwweb: http://michael.ellerman.id.au > > phone: +61 2 6212 1183 (tie line 70 21183) > > > > We do not inherit the earth from our ancestors, > > we borrow it from our children. - S.M.A.R.T Person > > > > > >
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev