----- Original Message -----
> From: "Bjorn Helgaas" <helg...@kernel.org>
> To: "Timothy Pearson" <tpear...@raptorengineering.com>
> Cc: "linuxppc-dev" <linuxppc-dev@lists.ozlabs.org>, "linux-kernel"
> <linux-ker...@vger.kernel.org>, "linux-pci"
> <linux-...@vger.kernel.org>, "Madhavan Srinivasan" <ma...@linux.ibm.com>,
> "Michael Ellerman" <m...@ellerman.id.au>,
> "christophe leroy" <christophe.le...@csgroup.eu>, "Naveen N Rao"
> <nav...@kernel.org>, "Bjorn Helgaas"
> <bhelg...@google.com>, "Shawn Anastasio" <sanasta...@raptorengineering.com>,
> "Lukas Wunner" <lu...@wunner.de>
> Sent: Wednesday, June 18, 2025 3:17:22 PM
> Subject: Re: [PATCH v2 2/6] pci/hotplug/pnv_php: Work around switches with
> broken
> On Wed, Jun 18, 2025 at 02:50:04PM -0500, Timothy Pearson wrote:
>> ----- Original Message -----
>> > From: "Bjorn Helgaas" <helg...@kernel.org>
>> > To: "Timothy Pearson" <tpear...@raptorengineering.com>
>> > Cc: "linuxppc-dev" <linuxppc-dev@lists.ozlabs.org>, "linux-kernel"
>> > <linux-ker...@vger.kernel.org>, "linux-pci"
>> > <linux-...@vger.kernel.org>, "Madhavan Srinivasan" <ma...@linux.ibm.com>,
>> > "Michael Ellerman" <m...@ellerman.id.au>,
>> > "christophe leroy" <christophe.le...@csgroup.eu>, "Naveen N Rao"
>> > <nav...@kernel.org>, "Bjorn Helgaas"
>> > <bhelg...@google.com>, "Shawn Anastasio"
>> > <sanasta...@raptorengineering.com>,
>> > "Lukas Wunner" <lu...@wunner.de>
>> > Sent: Wednesday, June 18, 2025 2:44:00 PM
>> > Subject: Re: [PATCH v2 2/6] pci/hotplug/pnv_php: Work around switches with
>> > broken
>>
>> > [+cc Lukas, pciehp expert]
>> >
>> > On Wed, Jun 18, 2025 at 11:56:54AM -0500, Timothy Pearson wrote:
>> >> presence detection
>> >
>> > (subject/commit wrapping seems to be on all of these patches)
>> >
>> >> The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
>> >> was observed to incorrectly assert the Presence Detect Set bit in its
>> >> capabilities when tested on a Raptor Computing Systems Blackbird system,
>> >> resulting in the hot insert path never attempting a rescan of the bus
>> >> and any downstream devices not being re-detected.
>> >
>> > Seems like this switch supports standard PCIe hotplug? Quite a bit of
>> > this driver looks similar to things in pciehp. Is there some reason
>> > we can't use pciehp directly? Maybe pciehp could work if there were
>> > hooks for the PPC-specific bits?
>>
>> While that is a good long term goal that Raptor is willing to work
>> toward, it is non-trivial and will require buy-in from other
>> stakeholders (e.g. IBM). If practical, I'd like to get this series
>> merged first, to fix the broken hotplug on our hardware that is
>> deployed worldwide, then in parallel see what can be done to merge
>> PowerNV support into pciehp. Would that work?
>
> Yeah, it wouldn't make sense to switch horses at this stage.
>
> I guess I was triggered by this patch, which seems to be a workaround
> for a defect in a device that is probably also used on non-PPC
> systems, and pciehp would need a similar workaround. But I guess you
> go on to say that pciehp already does something similar, so it guess
> it's already covered.
No problem, I completely understand. To be perfectly frank the existing code
quality in this driver (and the associated EEH driver) is not the best, and
it's been a frustrating experience trying to hack it into semi-stable
operation. I would vastly prefer to rewrite / integrate into the pciehp
driver, and we have plans to do so, but that will take an unacceptable amount
of time vs. trying to fix up the existing driver as a stopgap.
As you mentioned, pciehp already has this fix, so we just have to deal with the
duplicated code until we (Raptor) figures out how to merge PowerNV support into
pciehp.
