On Sun, 2008-09-21 at 09:19 +0800, Wang Jian wrote: > The following patch works fine.
And will break platforms that explicitely want IO port 0 to be on the primary bus, though I'm not sure there's many of these left... Ben. > diff --git a/arch/powerpc/kernel/pci-common.c > b/arch/powerpc/kernel/pci-common.c > index 063cdd4..4b913e0 100644 > --- a/arch/powerpc/kernel/pci-common.c > +++ b/arch/powerpc/kernel/pci-common.c > @@ -582,9 +582,19 @@ void __devinit pci_process_bridge_OF_ranges(struct > pci_controller *hose, > hose->io_base_virt = ioremap(cpu_addr, size); > > /* Expect trouble if pci_addr is not 0 */ > +#if 0 > if (primary) > isa_io_base = > (unsigned long)hose->io_base_virt; > +#endif > +#if 1 > + if (!isa_io_base) > + isa_io_base = > + (unsigned long)hose->io_base_virt; > + else if ((unsigned long)hose->io_base_virt < > isa_io_base) > + isa_io_base = > + (unsigned long)hose->io_base_virt; > +#endif > #endif /* CONFIG_PPC32 */ > /* pci_io_size and io_base_phys always represent IO > * space starting at 0 so we factor in pci_addr > -- > > On Sat, Sep 20, 2008 at 07:16:25PM +0800, Wang Jian wrote: > > Hi, > > > > Here I have a 8541 dev board, with 2 e1000 attached to pci0 and a > > homebrewed addon board inserted into pci1. I am trying to make it work > > under 2.6.26-rc8 (2.6.26 broken so I am working at rc8). > > > > The ioports allocation reads > > > > $ cat /proc/ioports > > 00000000-000fffff : /[EMAIL PROTECTED] > > 00001000-0000103f : 0000:00:0a.0 > > 00001040-0000107f : 0000:00:0b.0 > > ffefe000-ffffdfff : /[EMAIL PROTECTED] > > ffeff000-ffeff00f : 0001:01:0a.0 > > ffeff010-ffeff01f : 0001:01:0b.0 > > ffeff020-ffeff02f : 0001:01:0c.0 > > ffeff030-ffeff03f : 0001:01:0d.0 > > > > The port allocation for pci1 looks ridiculous. The addon board doesn't work. > > > > After poking around, I find pci_process_bridge_OF_ranges() in > > arch/powerpc/kernel/pci-common.c > > > > --snip-- > > if (primary) > > isa_io_base = (unsigned long)hose->io_base_virt; > > --snip-- > > > > then fixup_resource(), _IO_BASE = isa_io_base. fix_resource will use > > isa_io_base as base address to assign io port address space. > > > > This is reasonable, but on my board, pci1's hose->io_base_virt is > > smaller than pci0's. This lead to > > > > [ 0.064214] PCI:0000:00:0a.0 Resource 4 > > 0000000000001000-000000000000103f [20101] fixup... > > [ 0.064224] fixup_resource() offset=00000000, io_base_virt=fdeb4000, > > _IO_BASE=fdeb4000, io_base_phys=e2000000 > > [ 0.064232] PCI:0000:00:0a.0 0000000000001000-000000000000103f > > > > [ 0.065129] PCI:0001:01:0a.0 Resource 2 > > 0000000000001000-000000000000100f [20101] fixup... > > [ 0.065139] fixup_resource() offset=ffefe000, io_base_virt=fddb2000, > > _IO_BASE=fdeb4000, io_base_phys=e3000000 > > [ 0.065147] PCI:0001:01:0a.0 00000000ffeff000-00000000ffeff00f > > > > offset = fddb2000 - fdeb4000 = ffefe000 > > > > So far, I think the workaround is to replace the code above with > > > > --snip-- > > if (!isa_io_base) > > isa_io_base = (unsigned long)hose->io_base_virt; > > else if ((unsigned long)hose->io_base_virt < isa_io_base) > > isa_io_base = (unsigned long)hose->io_base_virt; > > --snip-- > > > > Then ioport allocation reads (But I haven't test if it works) > > > > $ cat /proc/ioports > > 00000000-000fffff : /[EMAIL PROTECTED] > > 00001000-0000100f : 0001:01:0a.0 > > 00001010-0000101f : 0001:01:0b.0 > > 00001020-0000102f : 0001:01:0c.0 > > 00001030-0000103f : 0001:01:0d.0 > > 00102000-00201fff : /[EMAIL PROTECTED] > > 00103000-0010303f : 0000:00:0a.0 > > 00103040-0010307f : 0000:00:0b.0 > > > > Can someone gives a better generic fix for this? > > > > PS: I attach the kernel log (without workaround) for reference. I added > > some printk code. > > > > > [ 0.064140] PCI: Found 0000:00:0a.0 [8086/1076] 000200 00 > > [ 0.064157] pci_read_bases(): IO: (0000:00:0a.0) > > l=00001001,start=00001000,flag=00000000 > > [ 0.064172] pci 0000:00:0a.0: calling 0xc01e9f98 > > [ 0.064182] PCI:0000:00:0a.0 Resource 0 > > 0000000080000000-000000008001ffff [20204] fixup... > > [ 0.064190] PCI:0000:00:0a.0 0000000080000000-000000008001ffff > > [ 0.064198] PCI:0000:00:0a.0 Resource 2 > > 0000000080020000-000000008002ffff [20204] fixup... > > [ 0.064206] PCI:0000:00:0a.0 0000000080020000-000000008002ffff > > [ 0.064214] PCI:0000:00:0a.0 Resource 4 > > 0000000000001000-000000000000103f [20101] fixup... > > [ 0.064224] fixup_resource() offset=00000000, io_base_virt=fdeb4000, > > _IO_BASE=fdeb4000, io_base_phys=e2000000 > > [ 0.064232] PCI:0000:00:0a.0 0000000000001000-000000000000103f > > [ 0.064241] PCI:0000:00:0a.0 Resource 6 > > 0000000000000000-000000000000ffff [27200] is unassigned > > [ 0.064268] PCI: Found 0000:00:0b.0 [8086/1076] 000200 00 > > [ 0.064284] pci_read_bases(): IO: (0000:00:0b.0) > > l=00001041,start=00001040,flag=00000000 > > [ 0.064300] pci 0000:00:0b.0: calling 0xc01e9f98 > > [ 0.064309] PCI:0000:00:0b.0 Resource 0 > > 0000000080040000-000000008005ffff [20204] fixup... > > [ 0.064316] PCI:0000:00:0b.0 0000000080040000-000000008005ffff > > [ 0.064325] PCI:0000:00:0b.0 Resource 2 > > 0000000080060000-000000008006ffff [20204] fixup... > > [ 0.064353] PCI:0000:00:0b.0 0000000080060000-000000008006ffff > > [ 0.064362] PCI:0000:00:0b.0 Resource 4 > > 0000000000001040-000000000000107f [20101] fixup... > > [ 0.064371] fixup_resource() offset=00000000, io_base_virt=fdeb4000, > > _IO_BASE=fdeb4000, io_base_phys=e2000000 > > [ 0.064379] PCI:0000:00:0b.0 0000000000001040-000000000000107f > > [ 0.064388] PCI:0000:00:0b.0 Resource 6 > > 0000000000000000-000000000000ffff [27200] is unassigned > > [ 0.064408] PCI: Fixups for bus 0000:00 > > [ 0.064413] PCI: Fixup bus 0 (PHB) > > [ 0.064420] Try to map irq for 0000:00:00.0... > > [ 0.064447] Try to map irq for 0000:00:0a.0... > > [ 0.064459] -> got one, spec 2 cells (0x00000000 0x00000001...) on > > /[EMAIL PROTECTED]/[EMAIL PROTECTED] > > [ 0.064478] -> mapped to linux irq 16 > > [ 0.064482] Try to map irq for 0000:00:0b.0... > > [ 0.064498] -> got one, spec 2 cells (0x00000001 0x00000001...) on > > /[EMAIL PROTECTED]/[EMAIL PROTECTED] > > [ 0.064510] -> mapped to linux irq 17 > > [ 0.064517] PCI: Bus scan for 0000:00 returning with max=00 > > [ 0.064973] PCI: Scanning bus 0001:01 > > [ 0.064989] PCI: Found 0001:01:00.0 [1057/000c] 000b20 00 > > [ 0.065011] pci 0001:01:00.0: calling > > fixup_hide_host_resource_fsl+0x0/0x50 > > [ 0.065024] pci 0001:01:00.0: calling 0xc01e9f98 > > [ 0.065055] PCI: Found 0001:01:0a.0 [104c/a106] 000000 00 > > [ 0.065069] pci_read_bases(): IO: (0001:01:0a.0) > > l=00001001,start=00001000,flag=00000000 > > [ 0.065087] pci 0001:01:0a.0: calling 0xc01e9f98 > > [ 0.065097] PCI:0001:01:0a.0 Resource 0 > > 00000000a0400000-00000000a07fffff [21208] fixup... > > [ 0.065105] PCI:0001:01:0a.0 00000000a0400000-00000000a07fffff > > [ 0.065113] PCI:0001:01:0a.0 Resource 1 > > 00000000a0800000-00000000a0ffffff [20200] fixup... > > [ 0.065121] PCI:0001:01:0a.0 00000000a0800000-00000000a0ffffff > > [ 0.065129] PCI:0001:01:0a.0 Resource 2 > > 0000000000001000-000000000000100f [20101] fixup... > > [ 0.065139] fixup_resource() offset=ffefe000, io_base_virt=fddb2000, > > _IO_BASE=fdeb4000, io_base_phys=e3000000 > > [ 0.065147] PCI:0001:01:0a.0 00000000ffeff000-00000000ffeff00f > > [ 0.065169] PCI: Found 0001:01:0b.0 [104c/a106] 000000 00 > > [ 0.065184] pci_read_bases(): IO: (0001:01:0b.0) > > l=00001011,start=00001010,flag=00000000 > > [ 0.065202] pci 0001:01:0b.0: calling 0xc01e9f98 > > [ 0.065211] PCI:0001:01:0b.0 Resource 0 > > 00000000a1000000-00000000a13fffff [21208] fixup... > > [ 0.065219] PCI:0001:01:0b.0 00000000a1000000-00000000a13fffff > > [ 0.065227] PCI:0001:01:0b.0 Resource 1 > > 00000000a1800000-00000000a1ffffff [20200] fixup... > > [ 0.065235] PCI:0001:01:0b.0 00000000a1800000-00000000a1ffffff > > [ 0.065243] PCI:0001:01:0b.0 Resource 2 > > 0000000000001010-000000000000101f [20101] fixup... > > [ 0.065253] fixup_resource() offset=ffefe000, io_base_virt=fddb2000, > > _IO_BASE=fdeb4000, io_base_phys=e3000000 > > [ 0.065261] PCI:0001:01:0b.0 00000000ffeff010-00000000ffeff01f > > [ 0.065284] PCI: Found 0001:01:0c.0 [104c/a106] 000000 00 > > [ 0.065298] pci_read_bases(): IO: (0001:01:0c.0) > > l=00001021,start=00001020,flag=00000000 > > [ 0.065316] pci 0001:01:0c.0: calling 0xc01e9f98 > > [ 0.065325] PCI:0001:01:0c.0 Resource 0 > > 00000000a2000000-00000000a23fffff [21208] fixup... > > [ 0.065333] PCI:0001:01:0c.0 00000000a2000000-00000000a23fffff > > [ 0.065341] PCI:0001:01:0c.0 Resource 1 > > 00000000a2800000-00000000a2ffffff [20200] fixup... > > [ 0.065360] PCI:0001:01:0c.0 00000000a2800000-00000000a2ffffff > > [ 0.065369] PCI:0001:01:0c.0 Resource 2 > > 0000000000001020-000000000000102f [20101] fixup... > > [ 0.065378] fixup_resource() offset=ffefe000, io_base_virt=fddb2000, > > _IO_BASE=fdeb4000, io_base_phys=e3000000 > > [ 0.065387] PCI:0001:01:0c.0 00000000ffeff020-00000000ffeff02f > > [ 0.065413] PCI: Found 0001:01:0d.0 [104c/a106] 000000 00 > > [ 0.065428] pci_read_bases(): IO: (0001:01:0d.0) > > l=00001031,start=00001030,flag=00000000 > > [ 0.065447] pci 0001:01:0d.0: calling 0xc01e9f98 > > [ 0.065456] PCI:0001:01:0d.0 Resource 0 > > 00000000a3000000-00000000a33fffff [21208] fixup... > > [ 0.065464] PCI:0001:01:0d.0 00000000a3000000-00000000a33fffff > > [ 0.065472] PCI:0001:01:0d.0 Resource 1 > > 00000000a3800000-00000000a3ffffff [20200] fixup... > > [ 0.065480] PCI:0001:01:0d.0 00000000a3800000-00000000a3ffffff > > [ 0.065488] PCI:0001:01:0d.0 Resource 2 > > 0000000000001030-000000000000103f [20101] fixup... > > [ 0.065498] fixup_resource() offset=ffefe000, io_base_virt=fddb2000, > > _IO_BASE=fdeb4000, io_base_phys=e3000000 > > [ 0.065506] PCI:0001:01:0d.0 00000000ffeff030-00000000ffeff03f > > [ 0.065527] PCI: Fixups for bus 0001:01 > > > _______________________________________________ > > Linuxppc-dev mailing list > > Linuxppc-dev@ozlabs.org > > https://ozlabs.org/mailman/listinfo/linuxppc-dev > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev