Hi Mimi,
thanks for taking a look.
On 1/2/26 11:14 PM, Mimi Zohar wrote:
On Wed, 2025-12-17 at 22:55 +0530, Srish Srinivasan wrote:
The wrapping key does not exist by default and is generated by the
hypervisor as a part of PKWM initialization. This key is then persisted by
the hypervisor and is used to wrap trusted keys. These are variable length
symmetric keys, which in the case of PowerVM Key Wrapping Module (PKWM) are
generated using the kernel RNG. PKWM can be used as a trust source through
the following example keyctl command
-> commands:
Yes, I will fix this.
keyctl add trusted my_trusted_key "new 32" @u
Use the wrap_flags command option to set the secure boot requirement for
the wrapping request through the following keyctl commands
case1: no secure boot requirement. (default)
keyctl usage: keyctl add trusted my_trusted_key "new 32" @u
OR
keyctl add trusted my_trusted_key "new 32 wrap_flags=0x00" @u
case2: secure boot required to in either audit or enforce mode. set bit 0
keyctl usage: keyctl add trusted my_trusted_key "new 32 wrap_flags=0x01" @u
case3: secure boot required to be in enforce mode. set bit 1
keyctl usage: keyctl add trusted my_trusted_key "new 32 wrap_flags=0x02" @u
NOTE:
-> Setting the secure boot requirement is NOT a must.
-> Only either of the secure boot requirement options should be set. Not
both.
-> All the other bits are requied to be not set.
-> required
Noted.
Will fix this.
-> Set the kernel parameter trusted.source=pkwm to choose PKWM as the
backend for trusted keys implementation.
-> CONFIG_PSERIES_PLPKS must be enabled to build PKWM.
Add PKWM, which is a combination of IBM PowerVM and Power LPAR Platform
KeyStore, as a new trust source for trusted keys.
Signed-off-by: Srish Srinivasan <[email protected]>
Thanks, Srish. Other than fixing the typo and other suggestion above,
Reviewed-by: Mimi Zohar <[email protected]>
Thanks for the review Mimi.
Will fix these typos and send out v3.
thanks,
Srish.
