Any comments about this patch?

Tested-by: Christian Zigotzky <[email protected]>

-- Christian


On 01/07/26 12:54, Christian Zigotzky wrote:
>  "pas_pci_init" was before "nemo_init_IRQ".
>  Now "pas_pci_init" is after "nemo_init_IRQ" in the official kernel source
>  code.
>  I think "pas_pci_init" scans (discovers) the PCI(e) devices
>  and after that, "nemo_init_IRQ" assigns interrupt numbers
>  to these devices if required.
>  It's not possible to assigns interrupt numbers to PCI(e) devices
>  which have not been discovered yet.
>
> Signed-off-by: Christian Zigotzky <[email protected]>
> ---
>  arch/powerpc/platforms/pasemi/pci.c   | 7 +++++++
>  arch/powerpc/platforms/pasemi/setup.c | 7 ++++---
>  2 files changed, 11 insertions(+), 3 deletions(-)
>
> diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
> index 2df955274652..7208c325bfc5 100644
> --- a/arch/powerpc/platforms/pasemi/pci.c
> +++ b/arch/powerpc/platforms/pasemi/pci.c
> @@ -25,6 +25,8 @@
>
>  #define PA_PXP_CFA(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
>
> +extern void nemo_init_IRQ(void);
> +
>  static inline int pa_pxp_offset_valid(u8 bus, u8 devfn, int offset)
>  {
>      /* Device 0 Function 0 is special: It's config space spans function 1 as > @@ -265,6 +267,11 @@ static int __init pas_add_bridge(struct device_node *dev)
>       */
>      isa_bridge_find_early(hose);
>
> +    /*
> +     * ISA bridge is now active, add the i8259 cascade (if needed)
> +     */
> +    nemo_init_IRQ();
> +
>      return 0;
>  }
>
> diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
> index d03b41336901..eec74611be46 100644
> --- a/arch/powerpc/platforms/pasemi/setup.c
> +++ b/arch/powerpc/platforms/pasemi/setup.c
> @@ -214,10 +214,12 @@ static void sb600_8259_cascade(struct irq_desc *desc)
>      chip->irq_eoi(&desc->irq_data);
>  }
>
> -static void __init nemo_init_IRQ(struct mpic *mpic)
> +void nemo_init_IRQ(void)
>  {
>      struct device_node *np;
>      int gpio_virq;
> +    struct mpic *mpic;
> +
>      /* Connect the SB600's legacy i8259 controller */
>      np = of_find_node_by_path("/pxp@0,e0000000");
>      i8259_init(np, 0);
> @@ -228,6 +230,7 @@ static void __init nemo_init_IRQ(struct mpic *mpic)
>      irq_set_chained_handler(gpio_virq, sb600_8259_cascade);
>      mpic_unmask_irq(irq_get_irq_data(gpio_virq));
>
> +    mpic = irq_get_chip_data(gpio_virq);
>      irq_set_default_domain(mpic->irqhost);
>  }
>
> @@ -298,8 +301,6 @@ static __init void pas_init_IRQ(void)
>          mpic_unmask_irq(irq_get_irq_data(nmi_virq));
>      }
>
> -    nemo_init_IRQ(mpic);
> -
>      of_node_put(mpic_node);
>      of_node_put(root);
>  }


--
Sent with BrassMonkey 34.2.2 (https://github.com/chzigotzky/Web-Browsers-and-Suites-for-Linux-PPC/releases/tag/BrassMonkey_34.2.2)

Reply via email to