SWIOTLB_ANY permits the swiotlb pool to be allocated outside the architecture's low address limit. This is already implied when SWIOTLB_INIT_ADDRESSING_LIMIT is not set, making SWIOTLB_ANY redundant.
Use SWIOTLB_INIT_ADDRESSING_LIMIT as the sole indication that the default pool and any dynamically allocated pools must reside below ARCH_LOW_ADDRESS_LIMIT. Otherwise, allow the pools to use any directly mapped memory. Signed-off-by: Aneesh Kumar K.V (Arm) <[email protected]> --- Documentation/core-api/swiotlb.rst | 8 ++++---- arch/powerpc/mm/mem.c | 6 ++++-- arch/s390/mm/init.c | 2 +- arch/x86/kernel/pci-dma.c | 2 +- include/linux/swiotlb.h | 5 ++--- kernel/dma/swiotlb.c | 17 ++++++----------- 6 files changed, 18 insertions(+), 22 deletions(-) diff --git a/Documentation/core-api/swiotlb.rst b/Documentation/core-api/swiotlb.rst index 71b4e4c27eb5..06d9f88fdf7b 100644 --- a/Documentation/core-api/swiotlb.rst +++ b/Documentation/core-api/swiotlb.rst @@ -148,10 +148,10 @@ may also be adjusted due to other conditions, such as running in a CoCo VM, as described above. If CONFIG_SWIOTLB_DYNAMIC is enabled, additional pools may be allocated later in the life of the system. Each pool must be a contiguous range of physical -memory. The default pool is allocated below the 4 GiB physical address line so -it works for devices that can only address 32-bits of physical memory (unless -architecture-specific code provides the SWIOTLB_ANY flag). In a CoCo VM, the -pool memory must be decrypted before swiotlb is used. +memory. The default pool is allocated below the architecture's low address +limit when it is needed for devices with limited DMA addressing. Otherwise, +it may be allocated anywhere in directly mapped memory. In a CoCo VM, the pool +memory must be decrypted before swiotlb is used. Each pool is divided into "slots" of size IO_TLB_SIZE, which is 2 KiB with current definitions. IO_TLB_SEGSIZE contiguous slots (128 slots) constitute diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 006ed41097e9..1bdea6c03848 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -295,9 +295,11 @@ void __init arch_mm_preinit(void) /* * Since the guest memory is inaccessible to the host, * devices always need to use the SWIOTLB buffer for DMA - * even if dma_capable() says otherwise. + * even if dma_capable() says otherwise. The hypervisor has + * no addressing limitation, so the buffer may be allocated + * anywhere. */ - ppc_swiotlb_flags |= SWIOTLB_ANY; + ppc_swiotlb_flags &= ~SWIOTLB_INIT_ADDRESSING_LIMIT; } /* diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 78f507e24ceb..ce10292447f1 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -166,7 +166,7 @@ static void __init pv_init(void) virtio_set_mem_acc_cb(virtio_require_restricted_mem_acc); /* make sure bounce buffers are shared */ - swiotlb_init(SWIOTLB_VERBOSE | SWIOTLB_ANY); + swiotlb_init(SWIOTLB_VERBOSE); swiotlb_update_mem_attributes(); } diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 3c82ebb5b6e0..e472631a5bd7 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -84,7 +84,7 @@ static void __init pci_xen_swiotlb_init(void) x86_swiotlb_enable = true; /* Xen can use a SWIOTLB pool anywhere in directly mapped memory. */ x86_swiotlb_flags &= ~SWIOTLB_INIT_ADDRESSING_LIMIT; - x86_swiotlb_flags |= SWIOTLB_INIT_REMAP | SWIOTLB_ANY; + x86_swiotlb_flags |= SWIOTLB_INIT_REMAP; swiotlb_init_remap(x86_swiotlb_flags, xen_swiotlb_fixup); dma_ops = &xen_swiotlb_dma_ops; if (IS_ENABLED(CONFIG_PCI)) diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h index be3962a33fc6..b3da751a81dd 100644 --- a/include/linux/swiotlb.h +++ b/include/linux/swiotlb.h @@ -15,11 +15,10 @@ struct page; struct scatterlist; #define SWIOTLB_VERBOSE (1 << 0) /* verbose initialization */ -#define SWIOTLB_ANY (1 << 1) /* allow any memory for the buffer */ /* Initialize a default-sized pool for devices with limited DMA addressing. */ -#define SWIOTLB_INIT_ADDRESSING_LIMIT (1 << 2) +#define SWIOTLB_INIT_ADDRESSING_LIMIT (1 << 1) /* Initialize a default-sized pool that requires architecture remapping. */ -#define SWIOTLB_INIT_REMAP (1 << 3) +#define SWIOTLB_INIT_REMAP (1 << 2) /* * Maximum allowable number of contiguous slabs to map, diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index c4611b2c4540..2715833a21f8 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -448,15 +448,10 @@ static void __init *swiotlb_memblock_alloc(unsigned long nslabs, size_t bytes = PAGE_ALIGN(nslabs << IO_TLB_SHIFT); void *tlb; - /* - * By default allocate the bounce buffer memory from low memory, but - * allow to pick a location everywhere for hypervisors with guest - * memory encryption. - */ - if (flags & SWIOTLB_ANY) - tlb = memblock_alloc(bytes, PAGE_SIZE); - else + if (flags & SWIOTLB_INIT_ADDRESSING_LIMIT) tlb = memblock_alloc_low(bytes, PAGE_SIZE); + else + tlb = memblock_alloc(bytes, PAGE_SIZE); if (!tlb) { pr_warn("%s: Failed to allocate %zu bytes tlb structure\n", @@ -598,10 +593,10 @@ void __init swiotlb_init_remap(unsigned int flags, #ifdef CONFIG_SWIOTLB_DYNAMIC if (!remap) io_tlb_default_mem.can_grow = true; - if (flags & SWIOTLB_ANY) - io_tlb_default_mem.phys_limit = virt_to_phys(high_memory - 1); - else + if (flags & SWIOTLB_INIT_ADDRESSING_LIMIT) io_tlb_default_mem.phys_limit = ARCH_LOW_ADDRESS_LIMIT; + else + io_tlb_default_mem.phys_limit = virt_to_phys(high_memory - 1); #endif /* if we have host or guest memory encryption */ -- 2.43.0
