Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt.  Only touches comments, no code
changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <[email protected]>
---
 drivers/macintosh/adbhid.c               | 4 ++--
 drivers/macintosh/macio_asic.c           | 2 +-
 drivers/macintosh/via-pmu.c              | 6 +++---
 drivers/macintosh/windfarm_lm75_sensor.c | 2 +-
 drivers/macintosh/windfarm_pm81.c        | 2 +-
 drivers/macintosh/windfarm_pm91.c        | 2 +-
 drivers/soc/fsl/qbman/qman_portal.c      | 2 +-
 7 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index 6155da58091b..68d1df6bc92d 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -32,7 +32,7 @@
  *
  * Improve Kensington support.
  * Split mouse/kbd
- * Move to syfs
+ * Move to sysfs
  */
 
 #include <linux/module.h>
@@ -604,7 +604,7 @@ adbhid_buttons_input(unsigned char *data, int nb, int 
autopoll)
 
                        case 0x7f:
                        case 0xff:
-                               /* keypad overlay toogle */
+                               /* keypad overlay toggle */
                                break;
 
                        default:
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index ee3caa3d87d1..926bd074352b 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -749,7 +749,7 @@ static void macio_pci_remove(struct pci_dev* pdev)
 
 /*
  * MacIO is matched against any Apple ID, it's probe() function
- * will then decide wether it applies or not
+ * will then decide whether it applies or not
  */
 static const struct pci_device_id pci_ids[] = { {
        .vendor         = PCI_VENDOR_ID_APPLE,
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 8c652c15018c..736936152b0b 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -482,7 +482,7 @@ static int __init via_pmu_start(void)
        /* Make sure PMU settle down before continuing. This is _very_ important
         * since the IDE probe may shut interrupts down for quite a bit of 
time. If
         * a PMU communication is pending while this happens, the PMU may 
timeout
-        * Not that on Core99 machines, the PMU keeps sending us environement
+        * Not that on Core99 machines, the PMU keeps sending us environment
         * messages, we should find a way to either fix IDE or make it call
         * pmu_suspend() before masking interrupts. This can also happens while
         * scolling with some fbdevs.
@@ -1286,7 +1286,7 @@ pmu_wait_complete(struct adb_request *req)
 
 /* This function loops until the PMU is idle and prevents it from
  * anwsering to ADB interrupts. pmu_request can still be called.
- * This is done to avoid spurrious shutdowns when we know we'll have
+ * This is done to avoid spurious shutdowns when we know we'll have
  * interrupts switched off for a long time
  */
 void
@@ -1549,7 +1549,7 @@ pmu_sr_intr(void)
                        /* 
                         * For PMU sleep and freq change requests, we lock the
                         * PMU until it's explicitly unlocked. This avoids any
-                        * spurrious event polling getting in
+                        * spurious event polling getting in
                         */
                        current_req = req->next;
                        req->reply_len += data_index;
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c 
b/drivers/macintosh/windfarm_lm75_sensor.c
index 128e9944429a..085b8c640e3a 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -108,7 +108,7 @@ static int wf_lm75_probe(struct i2c_client *client)
                return -ENXIO;
        }
 
-       /* Usual rant about sensor names not beeing very consistent in
+       /* Usual rant about sensor names not being very consistent in
         * the device-tree, oh well ...
         * Add more entries below as you deal with more setups
         */
diff --git a/drivers/macintosh/windfarm_pm81.c 
b/drivers/macintosh/windfarm_pm81.c
index 2a4a3746f6a0..308ed55688b2 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -734,7 +734,7 @@ static void wf_smu_remove(struct platform_device *ddev)
 
        /* Release all sensors */
        /* One more crappy race: I don't think we have any guarantee here
-        * that the attribute callback won't race with the sensor beeing
+        * that the attribute callback won't race with the sensor being
         * disposed of, and I'm not 100% certain what best way to deal
         * with that except by adding locks all over... I'll do that
         * eventually but heh, who ever rmmod this module anyway ?
diff --git a/drivers/macintosh/windfarm_pm91.c 
b/drivers/macintosh/windfarm_pm91.c
index 14089d57e5f7..d2e72d1aa6bc 100644
--- a/drivers/macintosh/windfarm_pm91.c
+++ b/drivers/macintosh/windfarm_pm91.c
@@ -656,7 +656,7 @@ static void wf_smu_remove(struct platform_device *ddev)
 
        /* Release all sensors */
        /* One more crappy race: I don't think we have any guarantee here
-        * that the attribute callback won't race with the sensor beeing
+        * that the attribute callback won't race with the sensor being
         * disposed of, and I'm not 100% certain what best way to deal
         * with that except by adding locks all over... I'll do that
         * eventually but heh, who ever rmmod this module anyway ?
diff --git a/drivers/soc/fsl/qbman/qman_portal.c 
b/drivers/soc/fsl/qbman/qman_portal.c
index 456ef5d5c199..e44de59ec522 100644
--- a/drivers/soc/fsl/qbman/qman_portal.c
+++ b/drivers/soc/fsl/qbman/qman_portal.c
@@ -33,7 +33,7 @@
 struct qman_portal *qman_dma_portal;
 EXPORT_SYMBOL(qman_dma_portal);
 
-/* Enable portal interupts (as opposed to polling mode) */
+/* Enable portal interrupts (as opposed to polling mode) */
 #define CONFIG_FSL_DPA_PIRQ_SLOW  1
 #define CONFIG_FSL_DPA_PIRQ_FAST  1
 
-- 
2.48.1


Reply via email to