Hi Anton,
thanks for your comments.
On Friday 31 October 2008, Anton Vorontsov wrote:
> > diff --git a/arch/powerpc/boot/dts/arches.dts
> > b/arch/powerpc/boot/dts/arches.dts index d9113b1..c568095 100644
> > --- a/arch/powerpc/boot/dts/arches.dts
> > +++ b/arch/powerpc/boot/dts/arches.dts
> > @@ -195,6 +195,38 @@
> > interrupts = <0x3 0x4>;
> > };
> >
> > + SPI0: [EMAIL PROTECTED] {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + device_type = "spi";
>
> device_type isn't needed.
OK, will remove.
> > + compatible = "ibm,spi-460gt", "ibm,ppc4xx-spi";
> > + reg = <0xef600900 7>;
> > + interrupt-parent = <&UIC1>;
> > + interrupts = <2 4>;
> > +
> > + /* gpio(s) representing chip select(s) */
> > + gpios = <&GPIO1 11 0>;
> > +
> > + [EMAIL PROTECTED] {
> > + compatible = "linux,mmc-spi", "mmc-spi";
>
> According to new (though still not approved) bindings, this should
> be "<board-specific>-mmc-slot", "mmc-spi-slot".
So I will wait a while with re-sending until this is "approved".
> > + reg = <0>;
> > + spi-max-frequency = <10000000>;
> > + voltage-range = <3300 3300>;
>
> For new bindings I changed this to "voltage-ranges", so that we
> could specify discontinuous range.
OK, will change in next version.
Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED]
=====================================================================
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
