On Wed, Sep 23, 2026 at 1:40 PM Myeonghun Pak <[email protected]> wrote:
>
> irq0_isr() schedules work_rst on a preamble error, and reset_rx_work()
> touches regmap.  remove() cancels that work while the IRQ is still
> registered, so the handler can queue it again during teardown.  The IRQ
> is also requested before INIT_WORK() and spin_lock_init().  Probe
> failure does not call remove(), so freeing the IRQ leaves queued work
> running, and an earlier interrupt schedules uninitialized work.
>
> Initialize the lock and devm_work_autocancel() before the IRQ.  Failed
> probe then frees the IRQ and cancels the work.  Unbind frees the IRQ
> before cancel_work_sync() and pm_runtime_disable().
>
> Fixes: 1e5d0f106164 ("ASoC: fsl_xcvr: reset RX dpath after wrong preamble")
> Cc: [email protected] # 6.13+
> Assisted-by: LLM
> Co-developed-by: Ijae Kim <[email protected]>
> Signed-off-by: Ijae Kim <[email protected]>
> Signed-off-by: Myeonghun Pak <[email protected]>

Reviewed-by: Shengjiu Wang <[email protected]>

Best regards
Shengjiu Wang
> ---
>  sound/soc/fsl/fsl_xcvr.c | 26 +++++++++++++++++++-------
>  1 file changed, 19 insertions(+), 7 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c
> index 9828272..29929df 100644
> --- a/sound/soc/fsl/fsl_xcvr.c
> +++ b/sound/soc/fsl/fsl_xcvr.c
> @@ -3,6 +3,7 @@
>
>  #include <linux/bitrev.h>
>  #include <linux/clk.h>
> +#include <linux/devm-helpers.h>
>  #include <linux/firmware.h>
>  #include <linux/interrupt.h>
>  #include <linux/module.h>
> @@ -57,6 +58,7 @@ struct fsl_xcvr {
>         struct snd_aes_iec958 tx_iec958;
>         u8 cap_ds[FSL_XCVR_CAPDS_SIZE];
>         struct work_struct work_rst;
> +       int irq;
>         spinlock_t lock; /* Protect hw_reset and trigger */
>         struct snd_pcm_hw_constraint_list spdif_constr_rates;
>         u32 spdif_constr_rates_list[SPDIF_NUM_RATES];
> @@ -1617,7 +1619,7 @@ static int fsl_xcvr_probe(struct platform_device *pdev)
>         struct fsl_xcvr *xcvr;
>         struct resource *rx_res, *tx_res;
>         void __iomem *regs;
> -       int ret, irq;
> +       int ret;
>
>         xcvr = devm_kzalloc(dev, sizeof(*xcvr), GFP_KERNEL);
>         if (!xcvr)
> @@ -1705,12 +1707,22 @@ static int fsl_xcvr_probe(struct platform_device 
> *pdev)
>                 return dev_err_probe(dev, PTR_ERR(xcvr->reset),
>                                      "failed to get XCVR reset control\n");
>
> +       /*
> +        * irq0_isr() schedules work_rst. Prepare the work and its lock
> +        * before the IRQ, and register the cancel action first so a failed
> +        * probe frees the IRQ and then cancels any queued work.
> +        */
> +       spin_lock_init(&xcvr->lock);
> +       ret = devm_work_autocancel(dev, &xcvr->work_rst, reset_rx_work);
> +       if (ret)
> +               return ret;
> +
>         /* get IRQs */
> -       irq = platform_get_irq(pdev, 0);
> -       if (irq < 0)
> -               return irq;
> +       xcvr->irq = platform_get_irq(pdev, 0);
> +       if (xcvr->irq < 0)
> +               return xcvr->irq;
>
> -       ret = devm_request_irq(dev, irq, irq0_isr, 0, pdev->name, xcvr);
> +       ret = devm_request_irq(dev, xcvr->irq, irq0_isr, 0, pdev->name, xcvr);
>         if (ret)
>                 return dev_err_probe(dev, ret, "failed to claim IRQ0\n");
>
> @@ -1751,8 +1763,6 @@ static int fsl_xcvr_probe(struct platform_device *pdev)
>                         fsl_xcvr_comp.name);
>         }
>
> -       INIT_WORK(&xcvr->work_rst, reset_rx_work);
> -       spin_lock_init(&xcvr->lock);
>         return ret;
>  }
>
> @@ -1760,6 +1770,8 @@ static void fsl_xcvr_remove(struct platform_device 
> *pdev)
>  {
>         struct fsl_xcvr *xcvr = dev_get_drvdata(&pdev->dev);
>
> +       /* Free the IRQ first so irq0_isr() cannot requeue work_rst. */
> +       devm_free_irq(&pdev->dev, xcvr->irq, xcvr);
>         cancel_work_sync(&xcvr->work_rst);
>         pm_runtime_disable(&pdev->dev);
>  }

Reply via email to