Olof Johansson wrote:
> On Sat, Dec 13, 2008 at 05:45:41PM +0100, Roel Kluin wrote:
>> map_onedev can return NULL, so catch that. Also iounmap if DMA controller 
>> can't be
>> found.

>> +
>>      iob_regs = map_onedev(iob_pdev, 0);
>> +    if (iob_regs == NULL) {
>> +            BUG();
>> +            printk(KERN_WARNING "Can't ioremap I/O Bridge registers\n");
>> +            err = -ENODEV;
>> +            goto out;
>> +    }
> 
> I don't see the point of doing BUG() _and_ error recovery. BUG() is
> definitely heavy handed. Something like "pasemi_dma_init: Can't..." would
> be a good and detailed enough error message.

Thanks for reviewing. This patch should address your comments to patch V1.

As I asked in my V2, I think there may also be a problem with
pasemi_mac_init_module(): if pci_register_driver() fails, then iob_regs won't 
get
iounmapped. right?

Is it ok to add the function pasemi_dma_exit() for these cleanup purposes?
and is it correct that we don't need to EXPORT_SYMBOL(pasemi_dma_exit)?
---------------------8<------------>8-------------------

map_onedev can return NULL, so catch that. Also iounmap if DMA controller can't 
be
found.

Signed-off-by: Roel Kluin <[email protected]>
---
 arch/powerpc/include/asm/pasemi_dma.h   |    3 +++
 arch/powerpc/platforms/pasemi/dma_lib.c |   15 ++++++++++++++-
 drivers/net/pasemi_mac.c                |    6 +++++-
 3 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/pasemi_dma.h 
b/arch/powerpc/include/asm/pasemi_dma.h
index 19fd793..7256a2c 100644
--- a/arch/powerpc/include/asm/pasemi_dma.h
+++ b/arch/powerpc/include/asm/pasemi_dma.h
@@ -535,4 +535,7 @@ extern void pasemi_dma_free_fun(int fun);
 /* Initialize the library, must be called before any other functions */
 extern int pasemi_dma_init(void);
 
+/* Clean up the library */
+extern void pasemi_dma_exit(void);
+
 #endif /* ASM_PASEMI_DMA_H */
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c 
b/arch/powerpc/platforms/pasemi/dma_lib.c
index 217af32..c97fba9 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -534,14 +534,17 @@ int pasemi_dma_init(void)
                err = -ENODEV;
                goto out;
        }
+
        iob_regs = map_onedev(iob_pdev, 0);
+       if (iob_regs == NULL)
+               printk(KERN_WARNING "pasemi_dma_init: Can't ioremap I/O Bridge 
registers\n");
 
        dma_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa007, NULL);
        if (!dma_pdev) {
                BUG();
                printk(KERN_WARNING "Can't find DMA controller\n");
                err = -ENODEV;
-               goto out;
+               goto out_unmap;
        }
        dma_regs = map_onedev(dma_pdev, 0);
        base_hw_irq = virq_to_hw(dma_pdev->irq);
@@ -624,9 +627,19 @@ int pasemi_dma_init(void)
 
        printk(KERN_INFO "PA Semi PWRficient DMA library initialized "
                "(%d tx, %d rx channels)\n", num_txch, num_rxch);
+       goto out;
+
+out_unmap:
+       iounmap(iob_regs);
 
 out:
        spin_unlock(&init_lock);
        return err;
 }
 EXPORT_SYMBOL(pasemi_dma_init);
+
+void pasemi_dma_exit(void)
+{
+       iounmap(iob_regs);
+}
+
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index edc0fd5..0897fa0 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -1919,7 +1919,11 @@ int pasemi_mac_init_module(void)
        if (err)
                return err;
 
-       return pci_register_driver(&pasemi_mac_driver);
+       err = pci_register_driver(&pasemi_mac_driver);
+       if (err)
+               pasemi_dma_exit();
+
+       return err;
 }
 
 module_init(pasemi_mac_init_module);

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to