Hi everybody ! This my first (but not least :) ) message on that mailing list. I hope I will find my solution. Here is my problem:
I have a MPC8272ADS board, 64MB RAM, 8MB Flash. I compiled u-boot using the existing config file, and compiled my linux kernel successfully with the defconfig file too. I have updated u-boot, downloaded my kernel file, and a ramdisk image from the eldk distribution. I have tried using a lot of bootargs ( bootargs root=/dev/ram rw console=ttyS0,115200 bootargs through nfs, etc.) When I am resetting my card, it reboots: bootargs=root=/dev/ram rw console=ttyS0,115200 bootcmd=bootm ff800000 ff980000 ## Booting kernel from Legacy Image at ff800000 ... Image Name: Linux-2.6.29-rc1-01197-g5a7b6e7- Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1487167 Bytes = 1.4 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at ff980000 ... Image Name: Simple Embedded Linux Framework Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 1730966 Bytes = 1.7 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Loading Ramdisk to 039d7000, end 03b7d996 ... OK U-Boot 2009.01 (Jan 14 2009 - 18:38:32) MPC8272 Reset Status: Check Stop, External Soft, External Hard MPC8272 Clock Configuration - Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq 100-300 - dfbrg 1, corecnf 0x1a, busdf 3, cpmdf 1, plldf 0, pllmf 3, pcidf 5 - vco_out 400000000, scc_clk 100000000, brg_clk 25000000 - cpu_clk 400000000, cpm_clk 200000000, bus_clk 100000000 - pci_clk 66666666 CPU: MPC8272 (HiP7 Rev 14, Mask 1.0 1K50M) at 400 MHz Board: Motorola MPC8272ADS DRAM: 64 MB FLASH: 8 MB In: serial Out: serial Err: serial Net: FCC1 ETHERNET Hit any key to stop autoboot: 0 => Thanks in advance for your help !
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev