Becky Bruce wrote:
On Jan 30, 2009, at 8:42 AM, Kumar Gala wrote:
On Jan 30, 2009, at 6:31 AM, Martyn Welch wrote:
Hi Guys,
It seems that 2.6.29-rc3 is not booting on the MPC8641 HPCN. I have
just updated u-boot to the latest git to see if that improved
matters, however I get stuck at the following. Any ideas?
did you update your .dtb as well?
Yup, just double checked it. SOC mapped at ffe00000. If I use the wrong DTB I
don't get any serial output...
We've changed the memory map for that board in the latest u-boot, which
is why you need a new .dtb. If this still failing, let me know, and
I'll give it a try on my board and see what's up since this is probably
my fault :)
It appears the same problem is affecting our sbc610 as well, the location of
the SOC hasn't changed on that board.
Martyn
--
Martyn Welch MEng MPhil MIET (Principal Software Engineer) T:+44(0)1327322748
GE Fanuc Intelligent Platforms Ltd, |Registered in England and Wales
Tove Valley Business Park, Towcester, |(3828642) at 100 Barbirolli Square,
Northants, NN12 6PF, UK T:+44(0)1327359444 |Manchester,M2 3AB VAT:GB 729849476
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
