> -----Original Message----- > From: Kumar Gala [mailto:ga...@kernel.crashing.org] > Sent: Thursday, February 12, 2009 1:25 PM > To: Li Yang-R58472 > Cc: linuxppc-dev list; Anton Vorontsov > Subject: Re: [PATCH] powerpc/83xx: Revive Marvell PHY option > on MPC8313E-RDB rev. C boards > > > On Feb 10, 2009, at 9:10 AM, Anton Vorontsov wrote: > > > > > Li, thanks for heads-up! > > > > One thing though: documentation says that Marvell PHY > address is 0x3, > > while old device tree and this patch: > > > > > http://www.bitshrine.org/gpp/linux-fsl-2.6.23-MPC8313ERDB-add-default- > > dts.patch > > > > says "0x1"... I don't have any rev. C boards, so it would > be great if > > somebody could confirm that 0x1 is the actual address.
The correct address is 0x3. The previous patch in revB BSP used a guess value before the revC documentation is available. The latest BSP has been updated to use the correct address. - Leo _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev