It is correct. Thanks
> -----Original Message----- > From: Heiko Schocher [mailto:h...@denx.de] > Sent: Tuesday, April 21, 2009 11:37 AM > To: Li Yang-R58472 > Cc: Gridish Shlomi-RM96313; Kumar Gala; > net...@vger.kernel.org; linuxppc-dev@ozlabs.org > Subject: [PATCH] [net, 83xx] ucc_geth.c: Fix upsmr setting in > RMII mode > > If using the UCC on a MPC8360 in RMII mode, don;t set > UCC_GETH_UPSMR_RPM bit in the upsmr register. > > Signed-off-by: Heiko Schocher <h...@denx.de> > --- > drivers/net/ucc_geth.c | 3 ++- > 1 files changed, 2 insertions(+), 1 deletions(-) > > diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c > index d3f39e8..44f8392 100644 > --- a/drivers/net/ucc_geth.c > +++ b/drivers/net/ucc_geth.c > @@ -1394,7 +1394,8 @@ static int adjust_enet_interface(struct > ucc_geth_private *ugeth) > (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) || > (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) || > (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) { > - upsmr |= UCC_GETH_UPSMR_RPM; > + if (ugeth->phy_interface != PHY_INTERFACE_MODE_RMII) > + upsmr |= UCC_GETH_UPSMR_RPM; > switch (ugeth->max_speed) { > case SPEED_10: > upsmr |= UCC_GETH_UPSMR_R10M; > -- > 1.6.0.6 > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
