diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/
powerpc/platforms/85xx/xes_mpc85xx.c
new file mode 100644
index 0000000..c1b55b8
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -0,0 +1,332 @@
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ *
+ * X-ES board-specific functionality
+ *
+ * Based on mpc85xx_ds code from Freescale Semiconductor, Inc.
+ *
+ * Author: Nate Case <nc...@xes-inc.com>
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <linux/of_platform.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ##
args)
+#else
+#define DBG(fmt, args...)
+#endif
DBG is not used.
+
+/* A few bit definitions needed for fixups on some boards */
+#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */
+#define MPC85xx_L2CTL_L2I 0x40000000 /* L2 flash invalidate */
+#define MPC85xx_L2CTL_L2SIZ_MASK 0x30000000 /* L2 SRAM size (R/O) */
+
+void __init xes_mpc85xx_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Failed to map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET |
+ MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+ 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_init(mpic);
+}
+
+static void xes_mpc85xx_configure_l1(void)
+{
+ uint spr;
+ asm volatile("msync; isync");
+ spr = mfspr(SPRN_L1CSR1);
+ asm volatile("msync; isync");
+ /* Enable instruction cache */
+ mtspr(SPRN_L1CSR1, spr | L1CSR1_ICFI | L1CSR1_ICE | L1CSR1_CPE);
+
+ /* Enable L1 data cache if it isn't already enabled */
+ if (mfspr(SPRN_L1CSR0) == 0x0) {
+ printk(KERN_INFO "xes_mpc85xx: Enabling L1 caches\n");
+ asm volatile("msync; isync");
+ mtspr(SPRN_L1CSR0, 0x0); /* Disable */
+ asm volatile("msync; isync");
+ mtspr(SPRN_L1CSR0, L1CSR0_DCFI); /* Invalidate */
+ asm volatile("msync; isync");
+ spr = mfspr(SPRN_L1CSR0);
+ asm volatile("msync; isync");
+ mtspr(SPRN_L1CSR0, spr | L1CSR0_DCFI | L1CSR0_DCE |
+ L1CSR0_CPE); /* Enable */
+ }
+}
+
+static void xes_mpc85xx_configure_l2(void __iomem *l2_base)
+{
+ volatile uint32_t ctl, tmp;
+
+ asm volatile("msync; isync");
+ tmp = in_be32(l2_base);
+
+ /*
+ * xMon may have enabled part of L2 as SRAM, so we need to set it
+ * up for all cache mode just to be safe.
+ */
+ printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n");
+
+ ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I;
+ if (machine_is_compatible("MPC8540") ||
+ machine_is_compatible("MPC8560"))
+ /*
+ * Assume L2 SRAM is used fully for cache, so set
+ * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3).
+ */
+ ctl |= (tmp & MPC85xx_L2CTL_L2SIZ_MASK) >> 2;
+
+ asm volatile("msync; isync");
+ out_be32(l2_base, ctl);
+ asm volatile("msync; isync");
+}
+
+static void xes_mpc85xx_fixups(void)
+{
+ struct device_node *np;
+ int err;
+
+ /*
+ * Legacy xMon firmware on some X-ES boards does not enable caches.
+ * We must ensure that they get enabled here.
+ */
+ if (machine_is(xes_mpc8548) || machine_is(xes_mpc8540))
+ xes_mpc85xx_configure_l1();
+
+ for_each_node_by_name(np, "l2-cache-controller") {
+ struct resource r[2];
+ void __iomem *l2_base;
+
+ /* Only MPC8548, MPC8540, and MPC8560 boards are affected */
+ if (!of_device_is_compatible(np,
+ "fsl,mpc8548-l2-cache-controller") &&
+ !of_device_is_compatible(np,
+ "fsl,mpc8540-l2-cache-controller") &&
+ !of_device_is_compatible(np,
+ "fsl,mpc8560-l2-cache-controller"))
+ continue;
+
+ err = of_address_to_resource(np, 0, &r[0]);
+ if (err) {
+ printk(KERN_WARNING "xes_mpc85xx: Could not get "
+ "resource for device tree node '%s'",
+ np->full_name);
+ continue;
+ }
+
+ l2_base = ioremap(r[0].start, r[0].end - r[0].start + 1);
+
+ xes_mpc85xx_configure_l2(l2_base);
+ }
+}
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+
+static int xes_mpc85xx_exclude_device(struct pci_controller *hose,
+ u_char bus, u_char devfn)
+{
+ struct device_node* node;
+ struct resource rsrc;
+
+ node = hose->dn;
+ of_address_to_resource(node, 0, &rsrc);
+
+ return PCIBIOS_SUCCESSFUL;
+}
You don't need this if you always return success.
+#endif /* CONFIG_PCI */
+
+/*
+ * Setup the architecture
+ */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+static void __init xes_mpc85xx_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+ struct device_node *root;
+ const char *model = "Unknown";
+
+ root = of_find_node_by_path("/");
+ if (root == NULL)
+ return;
+
+ model = of_get_property(root, "model", NULL);
+ if (strncasecmp(model, "xes,", strlen("xes,")) != 0)
+ return;
What is this check for?
+
+ printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n",
+ model + strlen("xes,"));
Why not print the name from machine_id.name
+
+ xes_mpc85xx_fixups();
+
+#ifdef CONFIG_PCI
+ for_each_node_by_type(np, "pci") {
+ if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+ of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+ struct resource rsrc;
+ of_address_to_resource(np, 0, &rsrc);
+ if ((rsrc.start & 0xfffff) == primary_phb_addr)
+ fsl_add_bridge(np, 1);
+ else
+ fsl_add_bridge(np, 0);
+ }
+ }
+
+ ppc_md.pci_exclude_device = xes_mpc85xx_exclude_device;
+#endif
+
+#ifdef CONFIG_SMP
+ mpc85xx_smp_init();
+#endif
+}
+
+static struct of_device_id __initdata xes_mpc85xx_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
+ {},
+};
+
+static int __init xes_mpc85xx_publish_devices(void)
+{
+ return of_platform_bus_probe(NULL, xes_mpc85xx_ids, NULL);
+}
+machine_device_initcall(xes_mpc8572, xes_mpc85xx_publish_devices);
+machine_device_initcall(xes_mpc8548, xes_mpc85xx_publish_devices);
Do you not need this for xes_mpc8540?
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init xes_mpc8572_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "xes,MPC8572")) {
+#ifdef CONFIG_PCI
+ primary_phb_addr = 0x8000;
+#endif
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+static int __init xes_mpc8548_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "xes,MPC8548")) {
+#ifdef CONFIG_PCI
+ primary_phb_addr = 0xb000;
+#endif
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+static int __init xes_mpc8540_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "xes,MPC8540")) {
+#ifdef CONFIG_PCI
+ primary_phb_addr = 0xb000;
+#endif
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+define_machine(xes_mpc8572) {
+ .name = "X-ES MPC8572",
+ .probe = xes_mpc8572_probe,
+ .setup_arch = xes_mpc85xx_setup_arch,
+ .init_IRQ = xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+define_machine(xes_mpc8548) {
+ .name = "X-ES MPC8548",
+ .probe = xes_mpc8548_probe,
+ .setup_arch = xes_mpc85xx_setup_arch,
+ .init_IRQ = xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+define_machine(xes_mpc8540) {
+ .name = "X-ES MPC8540",
+ .probe = xes_mpc8540_probe,
+ .setup_arch = xes_mpc85xx_setup_arch,
+ .init_IRQ = xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
--
1.6.0.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
